- Model NO.: MZH-V100L
- Material: 304 or 316L
- Mix Motor: USA ABB Brand
- Inverter: Panasonic Brand
- Vacuum Pume: Siemens Brand
- Homogenizer Speed: 3600rpm Adjustable
- Transport Package: Strong Plywood Package
- Origin: Guangzhou
- Volume: 150L
- Mix Speed: 63rpm Adjustable
- Temperature Sensor: Omran Brand
- PLC Control: Siemens Touch Screem
- Homogenizing Motor: USA ABB Brand
- Trademark: MIZIHO
- Specification: 1850*950*1750mm
- HS Code: 847982009
Hot Sale Face Creams skin care Vacuum Emulsifying Mixer
Â
Â
DESCRIPTION
MZH-V100L Vacuum homogeneous mixer consists of: oil tank, water tank, vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system. It is the most suitable equipment to produce high-grade skin care creams or other creams product
The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, diminution to the desired requirements. A lighting hole on the pot cover to observe the states of homogeneity. Entrance for spots of material provide possibility to add essence and suchlike materials. Either pour-out the material by tilting the pot or from the bottom, the latter way can make the materials enter the filling machine directly for quantitative filling. Easy to clean.
Control System: The control system is equipped with digital time relay device, so it can adjust time and speed of homogenizer based on different material. All control buttons are concentrated together,clear at a glance.
STANDARD CONFIGURATION
Â
TECHNICAL SPECIFIATION
Â
Detail pictures below
MZH-V100L Vacuum homogeneous mixer consists of: oil tank, water tank, vacuum homogeneous emulsifying machine, heating system, mixing system, vacuum system, electric lifting system, operation control cabinet, piping system. It is the most suitable equipment to produce high-grade skin care creams or other creams product
The material moves in a high speed between the rotor and stator, what can engender a strong hydraulic shear power to dispersing materials, meanwhile it can engender centrifugal power to extrude, milling, crash the material, ultimately make the material mixing, stirring, diminution to the desired requirements. A lighting hole on the pot cover to observe the states of homogeneity. Entrance for spots of material provide possibility to add essence and suchlike materials. Either pour-out the material by tilting the pot or from the bottom, the latter way can make the materials enter the filling machine directly for quantitative filling. Easy to clean.
Control System: The control system is equipped with digital time relay device, so it can adjust time and speed of homogenizer based on different material. All control buttons are concentrated together,clear at a glance.
STANDARD CONFIGURATION
- Min boiler, water tank, oil tank
- Vacuum pump and synchronous solenoid valve
- Emulsifier and material filter
- Oil pressure lifting system and blending system
- Stainless steel operation platformÂ
 TECHNICAL SPECIFIATION
| NO | Name | Technical parameters | Main brand |
| 1 | Main pot | Design volume: 125L Â Â Working volume:100L | Â |
| 2 | Material &Thickness |
Inner Layer:5mm (Polishing: 400MESH) Cover: 10mm, Stirring blade: 6mm, |
SUS316L |
| Middle Layer: 5mm; | SUS 304-2B | ||
| Cotton insulation is expanded perlite |  | ||
| Out Layer: 3mm (Polishing:400MESH) | SUS 304-2B | ||
| Pot Bottom: Discharge hole, Temperature detection hole. | Â | ||
| 3 | Stirring Way | Anchor agitator stirring scraper | SUS316LÂ |
| Scraping blade PTFE material, snapping stirring the pot wall, so the material does not stick pot wall mixed. | Â | ||
| Bottom temperature probe bulb to 20mm can accurately measure the temperature of the material. Temperature Sensor. | Omron | ||
| Up-mixing Clockwise Moter 2KW Â | Siemens | ||
| Up-mixing Frequency control: 0~63r/min | Taiwan Delta | ||
| 4 | Homogeneous | Homogenizer as SUS 316L solid stainless steel material, by laser machining process from several species such as helical vane cavity structure and the special work in strict accordance with Japan beauty he company to produce high precision, strong shear. | Â |
| Homogenizer Motor :0.75KW |  Siemens | ||
| Homogenizer Inverter: 0-3400r/min | Taiwan Delta | ||
| 5 | Sealing | Dharma Blue sealed with silicone rubber O-ring |  |
| Homogenizer using the world famous German high-speed Mechanical seal Burgmann. | Germany Burgmann | ||
| 6 | Heating way | Steam heating, Water test pressure 0.4Mpa,working Pressure<0.15-0.25Mpa | Â |
| 7 | Discharge way | Spout with sanitary pot bottom valve. | Â |
| Can through Variety pump discharge. | Â | ||
| 9 | Vacuum System | Using water ring vacuum pump to avoid pump inhale oil, foam etc., causing blockage. | Shanghai zhou xin |
| Vacuum pump Motor: 0.75KW | Â | ||
| Vacuum suction tube is 304-2BÂ connected. | Â | ||
| 10 | Electric Box | Electrical control box for the SUS304-2B, Appearance of sand board. |  |
| Net weight | 800kg(Only for standard equipment) | Â | |
| Power V. | 380V,50HZ. | Â | |
| GMP Standard | Machine platform is welded stainless steel square tube. Welding surface polishing treatment. SUS304-2B Prevent slip Plate on the stirs and platform. | Â |
Detail pictures below
Configuration Details:
| No. | Name | Origin | Model | Notes |
| 1 | Touch Screen | Japan, DIGITIL Brand | JP-2501-10.4″ | PLC |
| 2 | PLC | SIMENS | S7-200Â Series | PLC |
| 3 | Inverter | Japan Panasonic | BFV100Â Series | PLC |
| 4 | Homogenizing Motor | SIMENS | 11KW | Â |
| 5 | Reducer motor | Chinese Famous Brand | 7.5KW | Â |
| 6 | Sight Glass | AEROSPACE Brand | DN120 | With scraper |
| 7 | Vacuum Pump | China, ZHUOXIN Brand | 2BV2-061 | Â |
| 8 | Vacuum Pressure meter | Beijing, Brady Brand,Sino-US Joint Venture Companies | YTNP-60 | diaphragm type |
| 9 | Temperature sensor  | Tianjing, Zhonghuan Brand | WZP-235H |  |
| 10 | Solenoid valve | Taiwan, AIRTAC Brand | 4V-210 |  |
| 11 | Low-voltage Apparatus | SIMENS |  |  |
| 12 | Main Switch | France, Schneider  | NSC series |  |
| 13 | Button switch | Japan, Fuji | Â | Â |
| 14 | Hydraulic valve | Taiwan, Weige |  |  |
| 15 | Angle place valve | Shanghai, Shengyu | Â | Â |
| 16 | Shaft | Japan, NSK | Â | Â |
| 17 | Oil Sealing | Taiwan, SOG | Fluorous rubber | Â |
 II. Machinery Main Parts
III. Our Factory
IV. The Main Project
V. After Sale Service
1. Warranty time: One year guaranteed for quality, product whole life service any damage except the wrong operation during warranty. Period is repaired freely, But the travel and hotel expenses should
be count on buyer.
2. Commissioning services: The product's installation and commissioning at the demand side, our engineers will not leave there until get your agreement.
3. Traning Services: Our engineers will train your staff in your factory or video to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
4. Manintenance Services: Any malfunction happened, Once you inquiry us, We will reply you within
24 hours.
5. The File: The manual specification, report of the material which used to the equipment and other documents video related to GMP authentication information will be provided by us.
Â
VI. FAQ
1. Q: Are you factory or trading company?
  A: We are the professional manufacture of cosmetic machinery in China more than 10years.
2. Q: Where is your location?
  A: Company and Showroom located in Guangzhou china, Factory located in Jiangsu and Shanghai
      Province.
3. Q: Are your engineer be able to serve in oversea?
  A: Yes, we have a lot of experience install the machine in oversea.
4. Q: What is your material of your product?
  A: adopt with full stainless steel 304-2b and 316L
5. Q: How does your factory do regarding quality control?
  A: Two years spare parts,and full-life service of our machinery.
Our Company to customer satisfaction for the development of three goals: Product quality, Product technology and After-sales service.
Machining is any process in which the raw material is cut into a desired shape and sizes by a controlled material-removal process and equipment.
In our machining workshop, we own advanced milling, turning, drilling and grinding machines both simply old version and advanced CNC version, the machining center up to 5 axis operation system. We can fulfill the complicated work for our customer by good and stable quality.
The Machined Parts from our factory mainly include machined shaft, pulverizing grinding bowl for laboratory, machined bearing housing, machined compressor wheel for turbocharger, machined sleeves and any customized CNC Machined Parts.
Machined Parts
Machined Parts,Machined Aluminum Parts,Machined Spare Part,CNC Machined Part
Dandong Hengrui Machinery Co., Ltd. , http://www.hrcastings.com