In the industry of running transportation, "couple cars" such as ours are not uncommon. Her husband is 42 years old and has been driving long distances by car. He has been doing this for 20 years. Have to say, now the car is more and more advanced, look around the colleagues have changed cars, he also wanted to change, after all, this car has been running for nearly ten years. Although the transfer is a big expense, it must be spent for safety.

The car we used to drive is an imported used car. It has helped us in the past ten years to help us make a down payment for the house and to support the children’s education and the entire family’s life. Although it is hard work and tired, it feels like everything is worth it and it pays off.

As we all know, buying heavy trucks is largely an engine . Perhaps it was because of the complexities of importing heavy trucks before. However, pure imported heavy trucks cannot be bought, so when buying a car, you should look for a joint venture. The product. Later, left picks and right picks to see the Hongyan heavy truck carrying the Phillips powertrain Cursor 13 engine.

To be honest, it may be because the domestic tractors had not been opened before, and many of the vehicle failures faced by many card-friends were often faced with being “thrown on the road” and were very afraid. However, this car has reversed my impression of domestic cars. This C13 engine is a 480-horsepower product with strong power. Driving on the flat road feels very fast, it is obvious; when climbing, C13 climbs effortlessly and is obviously easier than other brands of vehicles.

SAIC Hongyan Shang Fei Hong Powertrain Cursor 13 Engine

Now that the freight rate is low, everyone is saying that it is not easy to do so card friends are particularly concerned about the fuel consumption of their own vehicles. Like everyone else, we are also more concerned about "oil tigers". So C13 is not costly in the end? In fact, I think this is a problem with both vehicle and personal habits. My husband said: "Fee is not costly, mainly to see people." I am very much in agreement with this statement. He has been driving so many cars and has always maintained good driving habits, so the fuel consumption is also very low.

Now we have formed a small group with several good masters to share information. We mainly run routes from Yiwu to Shenzhen, and we also have four other cars of other brands. Some of them are six-meter-five box cars. Ours is a seven-meter-five flat-screen. Our cars are wider than their car owners, and they are wider than they are. But to tell the truth, our car is the most fuel-efficient, with an average of 100 kilometers to save at least 3 oils. After buying a car, 200,000 kilometers have been ran, and it has been estimated that it will cost at least 40,000 yuan more than the counterparts. It seems that the original choice was completely correct.

Another thing I would like to say is that we can change the oil for 60,000 kilometers in this car, but I do not recommend changing the oil for 60,000 kilometers. With your car, cherishing is critical. Like our basic 50,000 kilometers, we will change the oil. Therefore, our vehicle glitch is basically not. In addition, the C13 engine of Shanghai Hongfei Powertrain is a real 60,000 kilometers oil change. It is absolutely no problem, and it is much more realistic than the exaggerated publicity of other domestic brands. Now, I feel like I'm really good

As truck couples, we are in the daily life of the car, the car is not comfortable and the noise is not big, it is still very important. Like the heart hopes, the car's voice is very small. Always go down, there is basically no place for dissatisfaction. Now, we are still the same as usual, old public car, I give him a "press car", help him to cook a meal, and help look at the reversing. I think I have been out of the sports car with my husband for four or five years. The children are a little bit bigger and watch them live like this. Although they are hard but still very happy.

The future. I hope that with the old open the car now, for the family and children continue to work hard, I wish the majority of card friends are safe and healthy.

Aluminum Die Casting Auto Parts
We are professional manufacture for Aluminum Die Casting For Auto Parts, Aluminium die casting for Communications, lamp part series, water pump part series, power tool series, radiator part series, Anti-Static Flooring products and other series products, we have factory in Ningbo Beilun.
Our automobile parts passed ISO9001 & ISO/TS 16949,we can provide auto parts for BMW,Benz,Audi,Toyota in high quality directly.


Our Advantages:
1) Experience in die casting for over 20 years and served customers all around the world.
2) More than 200 professional and hard working employees pursue a wonderful career.
3) International advanced-level equipment such as CNC, numerical lathes, furnace, welding equipment, CMM and detect &testing equipment we used to ensure our product's(Aluminium die casting for Auto parts) quality.
4) OEM service, you demand is our pursued.
5) ISO quality control
6) Standard: ASTM BS JIN DIN etc
7) Applied software for specification drawings: Pro/E, Auto CAD, Solid work, CAXA, UG. Etc.

We'll always create better Aluminum Die Casting for Auto parts, value-added services, to return new and old customers!If you want to find a top supplier in China, Welcome to visit our company!

Aluminum Die Casting For Auto Parts

Die Casting Accessories,Aluminum Die Casting Auto Parts,Engine Parts Aluminum Die Casting,Aluminum Die Casting Auto Gear Box Cover

Ningbo WEIBO Molding&Machine Co.,Ltd. , https://www.diecasting-manufacturers.com