Model NO.: JK03RD/JK06RD/JK12D
Dehumidify: 50L/H
Drying Temperature: 10~75c
Drying Capacity: 200~3000 Kg Per Batch
Control System: Touch Screen Operation
Electric Consumption: 17kwh Per Hour
Trademark: KINKAI
Transport Package: Plywood Cases
Specification: 1760x1060x1280mm
Origin: China
HS Code: 8419310000
Industrial heat pump drying equipment type fish dryer
Industrial Heat Pump Drying Equipment Type Fish Dryer

Introduction
KINKAI Heat pump fish dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried.
This kind of dryer is mainly composed of heat pump dryer and drying chamber.
This dryer will be controlled by touch screen controller, and the temperature can be adjusted.
It has low electric consumption.


 
Functions
Heating drying max temp 75C
Cooling drying min temp 8C
Heating +dehumidify drying

Technical Parameters
Double Dryers + Drying Chamber
Model Unit JK03RD (x2) JK06RD (x2) JK12RD (x2)
Power Input KW 9.6 17 30
Power Supply V/PH/HZ 380V/3PH, 50/60HZ 380V/3PH, 50/60HZ
220V/1PH, 50/60HZ
Rated Current A 19.2A(380V), 44A(220V) 34 60
Heating Capacity KW 21 42 84
Cooling Capacity KW 15.6 36 64
Dehumidify L/H 24 50 100
Max. Temperature ºC ≤75 ≤75 ≤75
Working Condition ºC 0-43 0-43 0-43
Electric Shock Protection Grade I I I
Max. Exhause Pressure Mpa 3 3 3
Noise dB(A) ≤75 ≤75 ≤75
Power Consumption/ H KWH 9.6 17 30
Electric Heater KW 6 12 24
Blowing Type / Horizontal Blowing 360ºC
Dimension Of Dryer MM 1675x860x1280 1760x1060x1280 2120x1360x1590
Weight KG 295x2 385x2 540x2

Industrial Heat Pump Drying Equipment Type Fish Dryer

Features of KINKAI Fish Dryer 
1, Energy saving
Adopt heat pump technology, absorb heat from air and recovery waste heat at the same time
Adopt close dehumidify + circulating drying type, saving operating cost;
 
2, Exact control temperature and humidity
The drying temperature can be easily controlled by PLC +Touch Screen control system.
 
3, Uniform drying
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly
 
4, The temperature: 10-75°C, Max 75°C, similar nature drying.
 
5, The baking plate dimensions and materials can customize as customer request.
 
6, Good drying quality.
During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
 
7, Safe and reliable operation
Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise
                     

Certificates
Industrial Heat Pump Drying Equipment Type Fish Dryer

Our Factory
Industrial Heat Pump Drying Equipment Type Fish Dryer

Customers Visited Our Factory
Industrial Heat Pump Drying Equipment Type Fish Dryer

Package and Delivery
For heat pump dryer parts---with plywood
For drying chamber +trolleys
  If shipped with 20ft container or 40ft container, no packing
  If shipped with LCL( less than container load), packed in plywood
Industrial Heat Pump Drying Equipment Type Fish Dryer

Our Services
A. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

B. After-sales service
1, Technical support for your installation, operation and maintenance. 
2, One year's warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.







 

Lightweight cars have a more prominent effect on the improvement of automotive energy efficiency. Aluminum alloy Automotive Parts can effectively reduce the weight of the vehicle while balancing the quality, strength, performance, cost, and safety of the vehicle, thereby reducing engine load. Improve the vehicle's dynamic performance, reduce fuel consumption and reduce greenhouse gas emissions. Therefore, the use of Automobile Aluminum Die Casting Parts has become recognized as one of the most effective means to achieve vehicle weight reduction.

High Precision Aluminum Die Casting Parts including:

     •  Engine System

     â€¢  Chassis System

     â€¢  Body System

     â€¢  Electrical System

     â€¢  Etc

Other Automobile Aluminum Die Casting Part

Automobile Aluminum Die Casting Part,Motorcycle Aluminum Die Casting Cylinder,Motorcycle Aluminum Die Casting Crankcase Cover

Zheke Mould Technology Co. Ltd. , https://www.zkdiecasting.com