Model NO.: Khps
Model NO.: Khps
KHPS electric high pressure cage type regulating valveKHPS electric high pressure cage type regulating valve is a valve with upper guiding structure. The valve is compact in structure, small in pressure loss, large in flow and wide in range. Part of the spool oriented oriented area, good vibration resistance. Leakage control valve with ANSI B16.104 standard. Valve equipped with multi spring diaphragm implement mechanism, has the advantages of compact structure, large output force. Product anastomosis GB/T4213-92.
Valve body
Type: single seat casting ball valve
Nominal diameter: 25, 40, 50, 80mm
Nominal pressure: 900 ANSI, 1500 JIS, 2500 63K
Connection type: flange connection: RF, RJ
Standard: JIS B2201-1984, ANSI flange B16.5-1981
Welding weld connection: SW (25 ~ 80mm) butt welding of BW (80mm)
Materials: carbon steel (ZG230-450), CrMo steel, stainless steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, ZG00Cr18Ni12Mo2Ti) and so on
Upper valve cover: room temperature type (P): -5 ~ +230 centigrade
Elongation type I (E1): +230 ~ +566
Note: the temperature should not exceed the scope of various materials.
Gland type: bolt pressing type
Packing: V PTFE filler, impregnated PTFE asbestos filler, asbestos woven filler, graphite filler
Valve assembly
Spool type: single seat plunger type spool
Flow characteristics: the percentage of properties (%) and linear features (L), see Figure 1
Material: stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti, 17-4PH, 9Cr18, 316L), stainless steel welding division stellite alloy
Electric actuator
Type: DKZ series electric implementing agencies; 361L series of electric implementing agencies; RS series of electric implementing agencies; PSL series electric implement mechanism of input signal: DKZ implementation mechanism: 0 type II ~ 10mA? DC (input 200 resistor); 4 type III ~ 20mA DC (input resistance of 250? The implementation of 361L omega) mechanism: 4 ~ 20mA? DC or 1 ~ 5V (input 250 resistor) RS implementation mechanism: 0 ~ DC, 4 ~ 10mA? 20mA? DC PSL implementation mechanism: 4 ~ 20mA DC?
Supply voltage
DKZ implementing agencies: 220V, 50Hz.
361L implementing agencies: 220V, 50/60Hz.
The implementation of RS control mechanism: single-phase 220V? AC + 5% 380V + 5%; three phase control.
PSL implementation mechanism: single phase control 220V, 50Hz
Manual mechanism: DKZ implementation mechanism:
hand wheel; 361L implementation mechanism: clutch type; RS implementation mechanism: handwheel; PSL implementation mechanism: handwheel
Ambient temperature: - 20 ~ 60 C
Valve action type: electrically closed or electrically operated
Pneumatic actuator
Type: LHA multi spring film actuating mechanism, LVA5 single spring film actuating mechanism, LVA6 single acting cylinder, moving piston actuating mechanism, LVP double acting cylinder piston actuating mechanism
Diaphragm material: Rubber clip nylon cloth, nylon cloth with nitrile rubber
Spring range: 20~100, 80 ~ 240kPa (LHA, LVA5), 190~350, 190 ~ 400kPa (LVA6)
Gas supply pressure: 140 ~ 400kPa (type LHA), 140 ~ 280kPa (type LVA5) 400 ~ 500kPa (LVA6), 300 ~ 500kPa (LVP)
Gas source interface: Rc1/4"
Ambient temperature: -30 ~ +70
Valve action type: use positive action or reaction mechanism to realize pneumatic closing or air opening of valve
Accessories: positioner, air filter pressure reducer, retaining valve, stroke switch, valve position conveyor, solenoid valve, hand wheel mechanism, etc.
Performance
Leakage: metal seat: less than rated valve 0.01%, ANSI grade B16.104IV anastomosis
Return difference: with a locator: less than 1% of full travel,
The basic deviation: with a locator: less than the full stroke + 1%, (Note: V PTFE standard)
Adjustable range: 50:1
Â
Cv value and stroke
| nominal diameter | 25 | 40 | 50 | 80 | ||||||||||||||||
| valve diameter | Â | 25 | 32 | 40 | 32 | 40 | 50 | 50 | 65 | 80 | ||||||||||
| rated Cv value | equal percentage (%)linear(L) |
JIS63K ANSI 900 ANSI 1500 |
0.25 | 0.4 | 0.63 | 1.0 | 1.6 | 2.5 | 4.0 | 6.3 | 12 | 12 | 17 | 25 | 17 | 25 | 47 | 47 | 75 | 110 |
| ANSI 2500 | - | 12 | 17 | 12 | 17 | 31 | 31 | 47 | 75 | |||||||||||
| Rated stroke(mm) | 14.3 | 25 | 38 | |||||||||||||||||
2, the maximum allowable pressure difference shall not exceed the maximum value stipulated by ANSI B16.34 standard.
3, the inlet pressure P1 is not allowed to exceed the maximum allowable pressure difference when the valve is closed.
4, the maximum allowable pressure difference with different valve leakage and change, with a box above the digital valve leakage that is less than or equal to 0.01%, below the digital valve leakage revealed performance is less than or equal to 0.001%
Flange distance mm
Â
| nominsl dia | A | ||||||
| JIS63K | ANSI 900 | ANSI 1500 | ANSI 2500 | ||||
| RF | RF(SW,BW) | RJ | RF(SW,BW) | RJ | RF(SW,BW) | RJ | |
| 25 | 276 | 292 | 292 | 292 | 292 | 318 | 318 |
| 40 | 323 | 333 | 333 | 333 | 333 | 358 | 361 |
| 50 | 354 | 375 | 378 | 375 | 378 | 400 | 403 |
| 80 | 431 | 440 | 443 | 460 | 463 | 498 | 504 |
Shape size mm
| nominal dia | implementing agency |
H | E | C | φB | |||||||
| ANSI900 JIS 63K | ANSI 1500 | ANSI 2500 | ANSI 900 | ANSI 1500 | ANSI 2500 | |||||||
| room temperature(P) | elongation type(E1) | room temperature(P) | elongation type(E1) | room temperature(P) | elongation type(E1) | |||||||
| 25 | LHA3D,R | 710 | 840 | 710 | 840 | 740 | 860 | 90 | 90 | 95 | 363 | 350 |
| LHA4D,R | 870 | 1000 | 870 | 1000 | 900 | 1020 | 520 | 470 | ||||
| LVA6R | 1115 | 1245 | 1115 | 1245 | 1145 | 1265 | - | 445 | ||||
| LVP5 | 895 | 1025 | 895 | 1025 | 925 | 1045 | - | 345 | ||||
| 40 | LHA3D,R | 735 | 875 | 735 | 875 | 780 | 925 | 100 | 105 | 120 | 363 | 350 |
| LHA4D,R | 890 | 1030 | 890 | 1030 | 935 | 1080 | 520 | 470 | ||||
| LVA5D | 1280 | 1420 | 1280 | 1420 | 1325 | 1470 | - | 620 | ||||
| LVA5R | 1390 | 1530 | 1390 | 1530 | 1435 | 1580 | - | 620 | ||||
| LVA6R | 1140 | 1280 | 1140 | 1280 | 1185 | 1350 | - | 445 | ||||
| LVP5 | 920 | 1060 | 920 | 1060 | 965 | 1110 | - | 345 | ||||
| LVP6 | 1140 | 1280 | 1140 | 1280 | 1185 | 1380 | - | 445 | ||||
| 50 | LHA3D,R | 765 | 925 | 765 | 925 | 800 | 960 | 110 | 120 | 130 | 363 | 350 |
| LHA4D,R | 925 | 1085 | 925 | 1085 | 960 | 1120 | 520 | 470 | ||||
| LVA5D | 1315 | 1475 | 1315 | 1475 | 1350 | 1510 | - | 620 | ||||
| LVA5R | 1425 | 1585 | 1425 | 1585 | 1460 | 1620 | - | 620 | ||||
| LVA6R | 1175 | 1335 | 1175 | 1335 | 1210 | 1370 | - | 445 | ||||
| LVP5 | 955 | 1115 | 955 | 1115 | 990 | 1150 | - | 345 | ||||
| LVP6 | 1175 | 1335 | 1175 | 1335 | 1210 | 1370 | - | 445 | ||||
| LVP7 | 1270 | 1420 | 1270 | 1420 | 1305 | 1465 | - | 545 | ||||
| 80 | LHA3D,R | 80 | 980 | 800 | 980 | 835 | 1005 | 140 | 150 | 165 | 363 | 350 |
| LHA4D,R | 960 | 1140 | 960 | 1140 | 995 | 1165 | 520 | 470 | ||||
| LVA5D | 1345 | 1525 | 1345 | 1525 | 1380 | 1550 | - | 620 | ||||
| LVA5R | 1455 | 1635 | 1455 | 1635 | 1490 | 1660 | - | 620 | ||||
| LVA6R | 1205 | 1385 | 1205 | 1385 | 1240 | 1410 | - | 445 | ||||
| LVP5 | 985 | 1165 | 985 | 1165 | 1020 | 1190 | - | 345 | ||||
| LVP6 | 1205 | 11385 | 1205 | 1385 | 1240 | 1410 | - | 445 | ||||
| LVP7 | 1295 | 1475 | 1295 | 1475 | 1330 | 1500 | - | 545 | ||||
Note: the size of the H column on the table is the number of the control valve without handwheel. If the handwheel mechanism is used, the size of the handwheel mechanism should be responded.
Weight KG
|
nominal dia |
 | flange connection | welding connection | ||||||||||
| ANSI 900 JIS63K | ANSI 150 | ANSI 2500 | ANSI 900 JIS63K | ANSI 150 | ANSI 2500 | ||||||||
| room temperature type(P) |
Elongate type (E1) |
room temperature (P) |
Elongate (E1) |
room temperature (P) |
elongate (E1) |
room temperature (P) |
elongate type (E1) |
room temperature (P) |
elongate type (E1) |
room temperature (P) |
elongate type (E1) |
||
| 25 | LHA3D,R | 55 | 60 | 60 | 65 | 85 | 90 | 45 | 50 | 50 | 55 | 70 | 75 |
| LHA4D,R | 85 | 90 | 90 | 95 | 115 | 120 | 80 | 85 | 85 | 90 | 100 | 105 | |
| LVA6R | 230 | 235 | 230 | 235 | 255 | 260 | 220 | 225 | 225 | 230 | 240 | 245 | |
| LVP5 | 105 | 110 | 105 | 110 | 130 | 135 | 95 | 100 | 100 | 105 | 115 | 120 | |
| 40 | LHA3D,R | 60 | 65 | 65 | 70 | 90 | 95 | 50 | 55 | 55 | 60 | 75 | 80 |
| LHA4D,R | 90 | 95 | 95 | 100 | 125 | 130 | 80 | 85 | 85 | 90 | 105 | 110 | |
| LVA5D | 190 | 195 | 195 | 200 | 225 | 230 | 180 | 185 | 185 | 190 | 205 | 210 | |
| LVA5R | 215 | 220 | 220 | 225 | 250 | 255 | 205 | 210 | 210 | 215 | 230 | 235 | |
| LVA6R | 230 | 235 | 235 | 240 | 265 | 270 | 220 | 225 | 225 | 230 | 245 | 250 | |
| LVP5 | 105 | 110 | 110 | 115 | 140 | 145 | 95 | 100 | 100 | 105 | 120 | 125 | |
| LVP6 | 180 | 185 | 185 | 190 | 215 | 220 | 170 | 175 | 175 | 180 | 195 | 200 | |
| 50 | LHA3D,R | 90 | 80 | 75 | 85 | 110 | 120 | 55 | 65 | 60 | 70 | 85 | 95 |
| LHA4D,R | 100 | 110 | 105 | 115 | 140 | 150 | 85 | 95 | 90 | 100 | 115 | 125 | |
| LVA5D | 200 | 210 | 205 | 215 | 240 | 250 | 185 | 195 | 190 | 200 | 215 | 225 | |
| LVA5R | 225 | 235 | 230 | 240 | 265 | 275 | 210 | 220 | 215 | 225 | 240 | 250 | |
| LVA6R | 240 | 250 | 245 | 255 | 280 | 290 | 225 | 235 | 230 | 240 | 255 | 265 | |
| LVP5 | 115 | 125 | 120 | 130 | 155 | 165 | 100 | 110 | 105 | 115 | 130 | 140 | |
| LVP6 | 190 | 200 | 195 | 205 | 230 | 240 | 175 | 185 | 180 | 190 | 205 | 215 | |
| LVP7 | 300 | 310 | 305 | 315 | 340 | 350 | 285 | 295 | 290 | 300 | 315 | 325 | |
| 80 | LHA3D,R | 105 | 115 | 140 | 160 | 225 | 245 | 85 | 95 | 110 | 130 | 170 | 190 |
| LHA4D,R | 135 | 145 | 170 | 190 | 255 | 275 | 115 | 125 | 140 | 160 | 200 | 220 | |
| LVA5D | 235 | 245 | 270 | 290 | 355 | 375 | 215 | 225 | 240 | 260 | 300 | 320 | |
| LVA5R | 260 | 270 | 295 | 315 | 380 | 400 | 240 | 250 | 265 | 285 | 325 | 345 | |
| LVA6R | 275 | 285 | 310 | 330 | 395 | 415 | 255 | 265 | 280 | 300 | 340 | 360 | |
| LVP5 | 150 | 160 | 185 | 205 | 270 | 290 | 130 | 140 | 155 | 175 | 215 | 235 | |
| LVP6 | 225 | 235 | 260 | 280 | 345 | 365 | 205 | 215 | 230 | 250 | 290 | 310 | |
| LVP7 | 335 | 345 | 370 | 390 | 455 | 475 | 315 | 325 | 340 | 360 | 400 | 420 | |
 KHPS electric high pressure cage type regulating valve
KHPS electric high pressure cage type regulating valve is a valve with upper guiding structure. The valve is compact in structure, small in pressure loss, large in flow and wide in range. Part of the spool oriented oriented area, good vibration resistance. Leakage control valve with ANSI B16.104 standard. Valve equipped with multi spring diaphragm implement mechanism, has the advantages of compact structure, large output force. Product anastomosis GB/T4213-92.
Valve body
Type: single seat casting ball valve
Nominal diameter: 25, 40, 50, 80mm
Nominal pressure: 900 ANSI, 1500 JIS, 2500 63K
Connection type: flange connection: RF, RJ
Standard: JIS B2201-1984, ANSI flange B16.5-1981
Welding weld connection: SW (25 ~ 80mm) butt welding of BW (80mm)
Materials: carbon steel (ZG230-450), CrMo steel, stainless steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, ZG00Cr18Ni12Mo2Ti) and so on
Upper valve cover: room temperature type (P): -5 ~ +230 centigrade
Elongation type I (E1): +230 ~ +566
Note: the temperature should not exceed the scope of various materials.
Gland type: bolt pressing type
Packing: V PTFE filler, impregnated PTFE asbestos filler, asbestos woven filler, graphite filler
Valve assembly
Spool type: single seat plunger type spool
Flow characteristics: the percentage of properties (%) and linear features (L), see Figure 1
Material: stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti, 17-4PH, 9Cr18, 316L), stainless steel welding division stellite alloy
Electric actuator
Type: DKZ series electric implementing agencies; 361L series of electric implementing agencies; RS series of electric implementing agencies; PSL series electric implement mechanism of input signal: DKZ implementation mechanism: 0 type II ~ 10mA? DC (input 200 resistor); 4 type III ~ 20mA DC (input resistance of 250? The implementation of 361L omega) mechanism: 4 ~ 20mA? DC or 1 ~ 5V (input 250 resistor) RS implementation mechanism: 0 ~ DC, 4 ~ 10mA? 20mA? DC PSL implementation mechanism: 4 ~ 20mA DC?
Supply voltage
DKZ implementing agencies: 220V, 50Hz.
361L implementing agencies: 220V, 50/60Hz.
The implementation of RS control mechanism: single-phase 220V? AC + 5% 380V + 5%; three phase control.
PSL implementation mechanism: single phase control 220V, 50Hz
Manual mechanism: DKZ implementation mechanism:
hand wheel; 361L implementation mechanism: clutch type; RS implementation mechanism: handwheel; PSL implementation mechanism: handwheel
Ambient temperature: - 20 ~ 60 C
Valve action type: electrically closed or electrically operated
Pneumatic actuator
Type: LHA multi spring film actuating mechanism, LVA5 single spring film actuating mechanism, LVA6 single acting cylinder, moving piston actuating mechanism, LVP double acting cylinder piston actuating mechanism
Diaphragm material: Rubber clip nylon cloth, nylon cloth with nitrile rubber
Spring range: 20~100, 80 ~ 240kPa (LHA, LVA5), 190~350, 190 ~ 400kPa (LVA6)
Gas supply pressure: 140 ~ 400kPa (type LHA), 140 ~ 280kPa (type LVA5) 400 ~ 500kPa (LVA6), 300 ~ 500kPa (LVP)
Gas source interface: Rc1/4"
Ambient temperature: -30 ~ +70
Valve action type: use positive action or reaction mechanism to realize pneumatic closing or air opening of valve
Accessories: positioner, air filter pressure reducer, retaining valve, stroke switch, valve position conveyor, solenoid valve, hand wheel mechanism, etc.
Performance
Leakage: metal seat: less than rated valve 0.01%, ANSI grade B16.104IV anastomosis
Return difference: with a locator: less than 1% of full travel,
The basic deviation: with a locator: less than the full stroke + 1%, (Note: V PTFE standard)
Adjustable range: 50:1
Â
Cv value and stroke
| nominal diameter | 25 | 40 | 50 | 80 | ||||||||||||||||
| valve diameter | Â | 25 | 32 | 40 | 32 | 40 | 50 | 50 | 65 | 80 | ||||||||||
| rated Cv value | equal percentage (%)linear(L) |
JIS63K ANSI 900 ANSI 1500 |
0.25 | 0.4 | 0.63 | 1.0 | 1.6 | 2.5 | 4.0 | 6.3 | 12 | 12 | 17 | 25 | 17 | 25 | 47 | 47 | 75 | 110 |
| ANSI 2500 | - | 12 | 17 | 12 | 17 | 31 | 31 | 47 | 75 | |||||||||||
| Rated stroke(mm) | 14.3 | 25 | 38 | |||||||||||||||||
2, the maximum allowable pressure difference shall not exceed the maximum value stipulated by ANSI B16.34 standard.
3, the inlet pressure P1 is not allowed to exceed the maximum allowable pressure difference when the valve is closed.
4, the maximum allowable pressure difference with different valve leakage and change, with a box above the digital valve leakage that is less than or equal to 0.01%, below the digital valve leakage revealed performance is less than or equal to 0.001%
Flange distance mm
Â
| nominsl dia | A | ||||||
| JIS63K | ANSI 900 | ANSI 1500 | ANSI 2500 | ||||
| RF | RF(SW,BW) | RJ | RF(SW,BW) | RJ | RF(SW,BW) | RJ | |
| 25 | 276 | 292 | 292 | 292 | 292 | 318 | 318 |
| 40 | 323 | 333 | 333 | 333 | 333 | 358 | 361 |
| 50 | 354 | 375 | 378 | 375 | 378 | 400 | 403 |
| 80 | 431 | 440 | 443 | 460 | 463 | 498 | 504 |
Shape size mm
| nominal dia | implementing agency |
H | E | C | φB | |||||||
| ANSI900 JIS 63K | ANSI 1500 | ANSI 2500 | ANSI 900 | ANSI 1500 | ANSI 2500 | |||||||
| room temperature(P) | elongation type(E1) | room temperature(P) | elongation type(E1) | room temperature(P) | elongation type(E1) | |||||||
| 25 | LHA3D,R | 710 | 840 | 710 | 840 | 740 | 860 | 90 | 90 | 95 | 363 | 350 |
| LHA4D,R | 870 | 1000 | 870 | 1000 | 900 | 1020 | 520 | 470 | ||||
| LVA6R | 1115 | 1245 | 1115 | 1245 | 1145 | 1265 | - | 445 | ||||
| LVP5 | 895 | 1025 | 895 | 1025 | 925 | 1045 | - | 345 | ||||
| 40 | LHA3D,R | 735 | 875 | 735 | 875 | 780 | 925 | 100 | 105 | 120 | 363 | 350 |
| LHA4D,R | 890 | 1030 | 890 | 1030 | 935 | 1080 | 520 | 470 | ||||
| LVA5D | 1280 | 1420 | 1280 | 1420 | 1325 | 1470 | - | 620 | ||||
| LVA5R | 1390 | 1530 | 1390 | 1530 | 1435 | 1580 | - | 620 | ||||
| LVA6R | 1140 | 1280 | 1140 | 1280 | 1185 | 1350 | - | 445 | ||||
| LVP5 | 920 | 1060 | 920 | 1060 | 965 | 1110 | - | 345 | ||||
| LVP6 | 1140 | 1280 | 1140 | 1280 | 1185 | 1380 | - | 445 | ||||
| 50 | LHA3D,R | 765 | 925 | 765 | 925 | 800 | 960 | 110 | 120 | 130 | 363 | 350 |
| LHA4D,R | 925 | 1085 | 925 | 1085 | 960 | 1120 | 520 | 470 | ||||
| LVA5D | 1315 | 1475 | 1315 | 1475 | 1350 | 1510 | - | 620 | ||||
| LVA5R | 1425 | 1585 | 1425 | 1585 | 1460 | 1620 | - | 620 | ||||
| LVA6R | 1175 | 1335 | 1175 | 1335 | 1210 | 1370 | - | 445 | ||||
| LVP5 | 955 | 1115 | 955 | 1115 | 990 | 1150 | - | 345 | ||||
| LVP6 | 1175 | 1335 | 1175 | 1335 | 1210 | 1370 | - | 445 | ||||
| LVP7 | 1270 | 1420 | 1270 | 1420 | 1305 | 1465 | - | 545 | ||||
| 80 | LHA3D,R | 80 | 980 | 800 | 980 | 835 | 1005 | 140 | 150 | 165 | 363 | 350 |
| LHA4D,R | 960 | 1140 | 960 | 1140 | 995 | 1165 | 520 | 470 | ||||
| LVA5D | 1345 | 1525 | 1345 | 1525 | 1380 | 1550 | - | 620 | ||||
| LVA5R | 1455 | 1635 | 1455 | 1635 | 1490 | 1660 | - | 620 | ||||
| LVA6R | 1205 | 1385 | 1205 | 1385 | 1240 | 1410 | - | 445 | ||||
| LVP5 | 985 | 1165 | 985 | 1165 | 1020 | 1190 | - | 345 | ||||
| LVP6 | 1205 | 11385 | 1205 | 1385 | 1240 | 1410 | - | 445 | ||||
| LVP7 | 1295 | 1475 | 1295 | 1475 | 1330 | 1500 | - | 545 | ||||
Note: the size of the H column on the table is the number of the control valve without handwheel. If the handwheel mechanism is used, the size of the handwheel mechanism should be responded.
Weight KG
|
nominal dia |
 | flange connection | welding connection | ||||||||||
| ANSI 900 JIS63K | ANSI 150 | ANSI 2500 | ANSI 900 JIS63K | ANSI 150 | ANSI 2500 | ||||||||
| room temperature type(P) |
Elongate type (E1) |
room temperature (P) |
Elongate (E1) |
room temperature (P) |
elongate (E1) |
room temperature (P) |
elongate type (E1) |
room temperature (P) |
elongate type (E1) |
room temperature (P) |
elongate type (E1) |
||
| 25 | LHA3D,R | 55 | 60 | 60 | 65 | 85 | 90 | 45 | 50 | 50 | 55 | 70 | 75 |
| LHA4D,R | 85 | 90 | 90 | 95 | 115 | 120 | 80 | 85 | 85 | 90 | 100 | 105 | |
| LVA6R | 230 | 235 | 230 | 235 | 255 | 260 | 220 | 225 | 225 | 230 | 240 | 245 | |
| LVP5 | 105 | 110 | 105 | 110 | 130 | 135 | 95 | 100 | 100 | 105 | 115 | 120 | |
| 40 | LHA3D,R | 60 | 65 | 65 | 70 | 90 | 95 | 50 | 55 | 55 | 60 | 75 | 80 |
| LHA4D,R | 90 | 95 | 95 | 100 | 125 | 130 | 80 | 85 | 85 | 90 | 105 | 110 | |
| LVA5D | 190 | 195 | 195 | 200 | 225 | 230 | 180 | 185 | 185 | 190 | 205 | 210 | |
| LVA5R | 215 | 220 | 220 | 225 | 250 | 255 | 205 | 210 | 210 | 215 | 230 | 235 | |
| LVA6R | 230 | 235 | 235 | 240 | 265 | 270 | 220 | 225 | 225 | 230 | 245 | 250 | |
| LVP5 | 105 | 110 | 110 | 115 | 140 | 145 | 95 | 100 | 100 | 105 | 120 | 125 | |
| LVP6 | 180 | 185 | 185 | 190 | 215 | 220 | 170 | 175 | 175 | 180 | 195 | 200 | |
| 50 | LHA3D,R | 90 | 80 | 75 | 85 | 110 | 120 | 55 | 65 | 60 | 70 | 85 | 95 |
| LHA4D,R | 100 | 110 | 105 | 115 | 140 | 150 | 85 | 95 | 90 | 100 | 115 | 125 | |
| LVA5D | 200 | 210 | 205 | 215 | 240 | 250 | 185 | 195 | 190 | 200 | 215 | 225 | |
| LVA5R | 225 | 235 | 230 | 240 | 265 | 275 | 210 | 220 | 215 | 225 | 240 | 250 | |
| LVA6R | 240 | 250 | 245 | 255 | 280 | 290 | 225 | 235 | 230 | 240 | 255 | 265 | |
| LVP5 | 115 | 125 | 120 | 130 | 155 | 165 | 100 | 110 | 105 | 115 | 130 | 140 | |
| LVP6 | 190 | 200 | 195 | 205 | 230 | 240 | 175 | 185 | 180 | 190 | 205 | 215 | |
| LVP7 | 300 | 310 | 305 | 315 | 340 | 350 | 285 | 295 | 290 | 300 | 315 | 325 | |
| 80 | LHA3D,R | 105 | 115 | 140 | 160 | 225 | 245 | 85 | 95 | 110 | 130 | 170 | 190 |
| LHA4D,R | 135 | 145 | 170 | 190 | 255 | 275 | 115 | 125 | 140 | 160 | 200 | 220 | |
| LVA5D | 235 | 245 | 270 | 290 | 355 | 375 | 215 | 225 | 240 | 260 | 300 | 320 | |
| LVA5R | 260 | 270 | 295 | 315 | 380 | 400 | 240 | 250 | 265 | 285 | 325 | 345 | |
| LVA6R | 275 | 285 | 310 | 330 | 395 | 415 | 255 | 265 | 280 | 300 | 340 | 360 | |
| LVP5 | 150 | 160 | 185 | 205 | 270 | 290 | 130 | 140 | 155 | 175 | 215 | 235 | |
| LVP6 | 225 | 235 | 260 | 280 | 345 | 365 | 205 | 215 | 230 | 250 | 290 | 310 | |
| LVP7 | 335 | 345 | 370 | 390 | 455 | 475 | 315 | 325 | 340 | 360 | 400 | 420 | |
Â
Aluminum Square Tube Profile,Aluminium Extruded Profile,Extruded Aluminum Products,Extruded Profile Line
Guangdong Huachang Group Co., Ltd. , https://www.wacangaluminium.com