The reporter learned from Fujian Lake Petrochemical Co., Ltd. that a few days ago, the Quanzhou Science and Technology Bureau organized related experts to close acceptance of the development and application of long-drainage heavy-duty engine oil planned by the Quanzhou Science and Technology Bureau undertaken by Fujian Lake Petrochemical Co., Ltd. It is understood that "the development and application of heavy-duty engine oil during long oil change period" is an energy-saving and consumption-reducing project. The company has completed the research and development and commissioning of the entire project, and has received unanimous praise from the acceptance panel experts.

On December 16, 2011, the Acceptance Team of Quanzhou Science and Technology Bureau came to Lake Petrochemical Co., Ltd. to conduct an on-site inspection of Lake Company, then listened to the work report of the project team, reviewed the relevant information, and finally conducted relevant questions on the project. Exchange and put forward valuable opinions.
Lake petrochemical united with CNHTC chief oil change engine oil product

The acceptance team finalized the acceptance of the "Development and Application of Heavy Duty Engine Oil for Long Drainage Period" undertaken by Lake Petrochemical.

It is understood that the project “Development and Application of Heavy Duty Engine Oil for Long Drainage Period” by the technical R&D team of Fujian Lake Petrochemical Co., Ltd. is to meet this emission after the implementation of the third phase of national vehicle pollutant emission standards. Standards, and in the context of achieving energy saving during the oil change period, the engine oil products that have been jointly developed with Sinotruck meet API CI-4 and long oil change periods. The project started in October 2008 and was determined through the sample preparation of oil samples. During the commissioning phase of the sample preparation, a test test was conducted at the end of 2008 on heavy-duty engine vehicles with EGR 300 horsepower or more produced by China National Heavy Duty Truck. Mileage sampling at different stages of the journey is sent to a third-party authoritative testing agency to detect changes in viscosity, changes in pH, oxidation degree, nitrification, elemental content, and additive element content. The test engine is disassembled after the vehicle test to observe engine wear. In the case of soot deposits and carbon deposits, the results all indicate that Lake's "long-load heavy-duty engine oil" can not only meet the requirements of the national three engine lubrication, but also the oil change period far exceeds the expected mileage, greatly reducing the consumption of lubricants and Sanqing parts. To achieve the purpose of energy conservation and emission reduction. The project was successfully researched and developed in December 2010, and it entered the production stage in early 2011. It officially went to the market and was widely welcomed by customers.

In an interview, Chen Chunping, the person in charge of Lake Petrochemical Technology, told reporters that heavy oil engine oils have excellent high-temperature oxidation resistance, clean dispersibility, abrasion resistance, and corrosion resistance during the long oil change period, and extend oil change intervals. The purpose of saving costs and resources. According to him, the product was inspected by the National Quality Supervision and Inspection Center for Fine Petrochemical Products. The relevant indicators were in line with the requirements of the national standard GB11122-2006, and were tested by the Changchun Technology Development Center of China Heavy-Duty Truck Group Co., Ltd. during the oil change period. Acquired Cummins CES20078 and API CI-4/SL certification, it has positive significance for energy saving and consumption reduction.

Chen Chunping also said that in recent years, Laker Petrochemical, which has an independent lubricants research and development organization, has always been adhering to the "strict and prudent" scientific research attitude in the petrochemical industry to explore energy-saving - environmental protection - the best among the three critical oil The company is committed to researching high-end automotive lubricants and automotive brake fluids with long oil change intervals, excellent quality, and low tail gas emissions. It is used by famous automobile enterprises and users at home and abroad such as FAW Group, Dongfeng Commercial Vehicles, General Motors, and Ford Motors. favorite.

“Energy saving, low carbon emission reduction is currently a major international trend, and Lake can uphold independent innovation, increase research investment in energy conservation and consumption reduction, and introduce production concepts that are conducive to green and low carbon, which is in the petrochemical industry. It is commendable.” At the end of the inspection and inspection work, the participating experts said in succession.

Metal Cutting Machine


CE3015 Efficient and Economical Fiber Laser Cutting Machine

Series number

Name of components and parts

Brand

Quantity

Unit

Remark

1

Body

Welding

1

set

2

Beam

cast aluminium(ZL104)

1

set

3

Moving objects

cast aluminium(ZL104)

1

set

4

Laser

Chuangxin

1

set

5

Cutting head

Raytools

1

set

6

Gear

Taiwan YYC

10

piece

7

Rack

Taiwan YYC

3

unit

8

Guide rail

Taiwan HIWIN

6

piece

9

Motor

Japan panasonic servo

3

unit

10

Reducer

France MOTOVARIO

3

unit

11

Bearing

Japan NSK

As requried

12

System

Shanghai Weihong

1

set

13

Cooling machine

Tongfei Refrigeration

1

set

14

Industrial Personal Computer

Taiwan Advantech

1

set

15

Electric elements

France Schneider

As requried

16

Proximity switch

Japan Omron

4

set

17

Switching power

Taiwan Mean Well

1

block

18

Travel switch

Delixi

1

piece

19

Cylinder parts

Japan SMC

As requried


15

Technical parameters

1

Type

CE3015

2

Effective Cutting Width(mm)

1500

3

Effective Cutting Length(mm)

3000

4

Lift(mm)

0-80

5

Input power

AC380V/50Hz;AC220V/50Hz

6

Cutting thickness(mm)

Stainless 6mm, carbon steel 14mm

7

Cutting speed( mm/min )

28000 (15000W/δ1mm Stainless )

8

Idle speed( mm/min )

100000

9

Max acceleration (G)

1.2

10

Position repeat accuracy

±0.05

11

Drive mode

Precision rack bilateral drive

12

Laser wavelength(nm)

1080

13

cooling mode

water-cooling

14

Environment temperature

5-35℃

15

Cutting material

Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet



Metal Cutting Machine,Gold Laser Cutting Machine,Metal Plate Cutting Machine,Metal Laser Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com