The technical content is not high, the industry standard is lacking, the product has no clear quality certification requirements, and it is an indisputable fact that a large number of low-quality LED glass tubes are flooding the market, which also causes the glass tube to be positioned in the low-end market for a long time. Therefore, while the glass tube has received much attention and respect, the doubts caused by the LED industry are also constantly heating up. The biggest advantage of glass lighting is its ultra-low price, but the so-called Cheng Xiaohe, the defeat is also Xiao He, its price is also the first place to be criticized by the doubters. In addition to being cheap, glass tubes have no other advantages. According to industry insiders, from the current situation, the glass tube is mainly for the mass consumer market, and the quality requirements are not so high. Everyone cares more about the price. It is precisely because of its positioning that manufacturers are blindly pursuing price advantages, resulting in uneven products and unguaranteed quality. It is precisely because of this vicious competition that the glass lamp industry is in chaos that various quality problems will arise, but fundamentally it is not a problem with the product itself, but a problem of disordered industry positioning. Qian Tao, chairman of Suzhou Rechi Optoelectronics Technology Co., Ltd. believes that as the LED market matures, the positioning of products is further clarified and industry standards are further standardized. By then, these so-called product quality problems will be effectively solved. At the same time, the relevant people also complained that the glass tube is not only brittle, but also has a heat dissipation speed that is far less than aluminum, and it is also very troublesome in the assembly process, and it is difficult to deal with various unexpected problems. In this regard, Tang Yuying held different opinions. He believes that the thermal conductivity of the glass tube is better than that of ordinary heat-conducting plastic. The heat of the glass tube can be conducted through the glass, so there is no problem with the heat dissipation of the glass tube. Therefore, the current power can achieve 18 watts of glass tubes, and the lumen temperature is relatively low. Coupled with soft light, high light efficiency and large light space, glass tubes still have a vast market. It is true that the current market for glass tubes is in a period of steady growth. As far as the product itself is concerned, the glass tube is already very affordable and the price is very high. According to the investigation of the reporter, the current 12-13 watt glass lamp in Zhongshan area is about 8.8 yuan. High-quality manufacturers, such as Guoxing Optoelectronics, Foshan Lighting, etc., the price is also about a dollar per watt. The glass tube is positioned in the mass market, that is, the low-end market. The first consideration is of course the price/performance ratio; while the engineering category is based on the whole plastic tube and aluminum-plastic tube. In the distribution channel, we can see that the market share of glass tubes is gradually increasing. With its ultra-low price, glass tubes have been favored by many customers. We are also gradually increasing the production capacity of glass tubes according to customers' intentions. An industry insider said. Nowadays, the impact of glass tubes on aluminum-plastic tubes is very large. Tang Yuying said that glass lamps are now being produced by many manufacturers, which makes the sales of aluminum-plastic tubes decline. In terms of market share, the market share of glass tubes will continue to expand. It is conservatively estimated that the market share of glass tubes will reach about 30% in the next year. In addition, Lv Jurong, general manager of Bailida Optoelectronics, also said that glass lamps continue to go to the low-end market. At the same time that the whole country is making glass tubes, the all-plastic lamps in the high-end market and with safety regulations will also be future lamps. Another direction of the tube, aluminum plastic pipe or will be slowly eliminated. In the near future, the lamp market will be divided equally between the glass tube and the plastic tube.
EVA Boat Flooring is a new type marine sheet flooring for boat or yacht. Made from marine grade UV-resistant, closed cell EVA foam material, it is waterproof, antibacterial, comfortable, durable and non-skid.
Basically, the boat flooring has two different textures available, which is brushed and embossed. The sheets can be cut into size to fit the shape of boat decking, then peel the adhesive on the backing and stick it.
Normally the EVA marine sheet can be applied on the boat decking, or with a thicker material, it can be applied as helm station pad, seat pad, or coming bolster pad. What's more, it can be also applied on the edge of swimming pool, cause it can provide a good traction and safety when the feet is wet.
Eva Boat Flooring,Eva Yacht Flooring,Marine Sheet,Diy Boat Flooring,Boat Floor Mat,Boat Mat
Huizhou City Melors Plastic Products Co., Limited , https://www.melorsmarine.com