People often compare the engine to the "heart" of the heavy truck as the power source of the vehicle. Whether the engine power is strong directly affects the operational level of the heavy truck. Therefore, the heavy truck that undertakes the road transportation task in China must have a strong "heart". The heavy-duty truck with the Cursor13 engine launched by Hongyan Jieshi has been well received by users since its launch. It is reported that this product has a strong “big heart†with a maximum of 560 horsepower. The technology is synchronized to Europe and has Iveco lineage. Strong power, leading emission standards, opening the "core" era of heavy trucks.
Red Rock Lion with Cursor13 engine
With the launch of the Hongshang Jie Lion Curry Edition with the Cursor13 engine in September, Shenzhen and Liyang are listed one after another. People's attention has once again focused on this synchronous European technology heavy truck body.
The Cursor13 engine passed the Dakar challenge
In Europe, the standard for measuring a heavy truck is not how many tons it can pull, but whether its engine power is strong. Because of the complicated terrain, high-horsepower engines have become commonplace in Europe and have become mainstream. The Cursor13 engine carried by the Hongyan Jieshi has a maximum horsepower of 560 in Europe, which has been widely recognized by European users.
Iveco Commercial Vehicle with Cursor13 Engine
In the 2012 Dakar Rally, the Cursor13 engine won the championship along with the Iveco commercial vehicle. With the “Dalies Rally in the World,†the Dakar Rally, where most of the stage is set in the vast desert, the course of the game is very difficult and dangerous, and being able to participate in such a race is in itself a confidence in the quality of the vehicle. The Iveco team with the Cursor13 engine beat the crowds in the game and eventually won the championship to show the world its superior performance of super power and ultra-high reliability. It proved its status as "dominant" with strength.
Red Rock Lion Lion Cursor13 allows you to immediately upgrade power
According to the survey, with the change of China's logistics transportation mode and road environment, in the current logistics and transportation field, heavy-duty trucks equipped with engines below 300 hp have apparently been somewhat “unsatisfactory.†Large-horsepower engines have become the consensus of industry development from this year. According to the data provided by major brands in the past six months, the market share of heavy-duty heavy trucks has increased significantly. Currently, the maximum horsepower of most products on the market is above 400 horsepower. The 430, 480-horsepower products currently launched by Hongyan Jieshi have apparently competed with the competition. Not only that, but the maximum horsepower of the Cursor13 engine is “broken four into five†and the maximum horsepower can be increased to 560 horsepower. This will enable simultaneous European operation and seamless integration with the European high horsepower market.
Cursor13 engine
Hongyanjieshi Cursor13 engine power products have been widely acclaimed by users since they were introduced in China. Today, the introduction of the Cursor13 engine Jieshi Changtu Edition in the domestic market is bound to change the competitive landscape in the Chinese market and drive the Chinese market into a parcel of world heavy trucks. The "big horsepower" era.
overhead Casting Crane with hook are the main handling equipment for smelting workshop of steel work. They are used for conveying, pouring and hot metal charging of liquid metal in smelting process. It mainly consists of main beam, hook trolley, crane traveling mechanism,cabin and electric controlling system, etc. Foundry crane is one of the main equipment in the continuous casting technology of steel making. It is mainly used transfer the pouring melted iron to the appointed place, and the thermal-protective coating is added at the bottom of the main girder. The place where molten nonmetal material and red-hot solid metal is lifted. The casting Overhead Crane are heavy duty for 20-24 hours working.
Features:
1.Heavy Duty and High Efficient
2.Long Life Span: 30-50years.
3.Easy for Installation and maintenance.
4.High Temperature
5.Full Spare Parts will offer
6.Dual Lift Motor for Main Lifting Mechanism
Specification:
Lifting Weight (t)
125/32
140/32
160/32
185/50
200/50
225/65
240/80
280/80
320/80
Working Class
A7
A7
A7
A7
A7
A7
A7
A7
A7
Span(m)
19
19
27
28.5
28
27
22
22
24.5
Lifting
Height(m)
Main Hook
24
22
25
27
26
32
25
29
28
Aux. Hook
26
24
26
29
26
34
27
29
32
Speed
(m/min)
Main Hook
7.6
7.8
9.8
7.5
6
11
7
12
7.5
Aux. Hook
9.7
9.7
12
10
10
11
9.6
10
10
Main Trolley
38
36
43.5
40
41
41
35
40
29
Aux. Trolley
39
37.5
43.5
38
38
39.5
38
40
39
crane
76
73
84
80
78
84
80
80
58
Max. Wheel Load(KN)
505
535
485
525
530
550
545
735
750
Steel Track Recommended
QU120
QU120
QU120
QU120
QU120
QU120
QU120
QU120
QU120
Power Source
380V 50HZ 3-Phase A.C.
Other types to choose from
Casting Crane
Casting Crane,Girder Overhead Casting Crane,Cast Overhead Crane,Girder Overhead Crane
Jiangxi Mide Industrial Co., Ltd. , http://www.midecrane.com