Introduction
Δ Material: PE/PP film, PP Woven/sack Bag,HDPE bottle flakes, squeezed mulching film etc.
Δ Capacity: 60-1000KG/HR
Δ Finial pellet size: Φ 3mm× 3mm
Main technical parameter
Model | ML85 | ML100 | ML130 | ML160 | ML180 | |||
Output | PP | 120KG | 250KG | 400KG | 600KG | 800KG | ||
HDPE | 150KG | 300KG | 500KG | 700KG | 1000KG | |||
LDPE | 180KG | 400KG | 600KG | 800KG | 1200KG | |||
Machine weight | 4000KG | 6000KG | 8000KG | 12000KG | 15000KG | |||
Total power | 140KW | 215KW | 325KW | 420KW | 590KW | |||
 Compactor/agglomerator |
Compactor diameter | φ800mm | φ1000mm | φ1200mm | φ1300mm | φ1500mm | ||
Blade(rotary/stable) | 6/5 | 6/12 | 9/12 | 9/13 | 12/15 | |||
Motor | 37KW | 55KW | 90KW | 110KW | 160KW | |||
Extruder | Type | The degassing zone is designed by properties of different material | ||||||
Screw diameter | φ85mm | φ100mm | φ130mm | φ160mm | φ180mm | |||
L/D | 33/1 | 33/1 | 33/1 | 30/1 | 30/1 | |||
Screw rotary speed(RPM) | 0-120 | 0-120 | 0-120 | 0-120 | 0-120 | |||
Barrel heating power | 24KW | 35KW | 54KW | 75KW | 120KW | |||
Barrel cooling method | BY AIR | BY AIR | BY AIR | BY AIR | BY AIR | |||
Temperature control zone | 0.3KWx4 | 0.3KWx5 | 0.5KWx5 | 0.5KWx5 | 0.5KWx6 | |||
Motor power | 55KW | 90KW | 132KW | 185KW | 250KW | |||
Screen changer | Type | Two position plate hydraulic screen changer(without stopping machine and will not influence the final output) | ||||||
Heating | 7KW | 10KW | 16KW | 20KW | 30KW | |||
Temperature control zone | 1 | 1 | 1 | 1 | 1 | |||
Oil pump | 1.5KW | 2.2KW | 3KW | 3KW | 3KW | |||
  Die & cutting system |
Die mode | Round shape die plate | ||||||
Heating power of die | 5KW | 6KW | 10KW | 10KW | 10KW | |||
Cutting method | Die face cutting system | |||||||
Cutting motor power | 1.5KW | 1.5KW | 2.2KW | 2.2KW | 2.2KW | |||
Temperature control zone | 1 | 1 | 1 | 1 | 1 | |||
Water pump | 2.2KW | 3KW | 4KW | 4KW | 4KW | |||
Power of centrifugal dryer | 2.2KW | 3KW | 4KW | 5.5KW | 7.5KW |
Photos for your reference
Feed ABS Regind material from this vacuum system to side feederÂ
Regrind ABS materialÂ
Multi-function plastic granulating line
Vertical water ring die face cutting system which is suitable for various kinds of material
Centrifugal dryer to remove water of pellets
Vibration sieve to select good and bad pellets
In order to match your requirement and provide you a proper quotation, please advise:
• What material do you want to recycling? PE film? PP woven bag? HDPE/PP bottle? or other plastic?
• What capacity(kg/h) do you want?
• What is the final size(mm) of granules you want?
• Other special requirements about the PE plastic pelletizing machine you want.
Our service:
Before-sale
• Introduce products in detail  Â
• Recommend suitable solution  Â
• Offer test
During manufacturing
• Provide layout and engineering conditions  Â
• Offer screw plan and related documents
• Inform the project processing status  Â
• Insure the product designed in accordance with technical document
After-sale
• Provide installation, commissioning and training  Â
• Offer spare parts
• Provide necessary technical support and update information
Feel free to contact with me if you want to leanr more information.
Contact persion:Ms. Laura
Mob.: 86 15962366319
Introduction
Δ Material: PE/PP film, PP Woven/sack Bag,HDPE bottle flakes, squeezed mulching film etc.
Δ Capacity: 60-1000KG/HR
Δ Finial pellet size: Φ 3mm× 3mm
Main technical parameter
Model | ML85 | ML100 | ML130 | ML160 | ML180 | |||
Output | PP | 120KG | 250KG | 400KG | 600KG | 800KG | ||
HDPE | 150KG | 300KG | 500KG | 700KG | 1000KG | |||
LDPE | 180KG | 400KG | 600KG | 800KG | 1200KG | |||
Machine weight | 4000KG | 6000KG | 8000KG | 12000KG | 15000KG | |||
Total power | 140KW | 215KW | 325KW | 420KW | 590KW | |||
 Compactor/agglomerator |
Compactor diameter | φ800mm | φ1000mm | φ1200mm | φ1300mm | φ1500mm | ||
Blade(rotary/stable) | 6/5 | 6/12 | 9/12 | 9/13 | 12/15 | |||
Motor | 37KW | 55KW | 90KW | 110KW | 160KW | |||
Extruder | Type | The degassing zone is designed by properties of different material | ||||||
Screw diameter | φ85mm | φ100mm | φ130mm | φ160mm | φ180mm | |||
L/D | 33/1 | 33/1 | 33/1 | 30/1 | 30/1 | |||
Screw rotary speed(RPM) | 0-120 | 0-120 | 0-120 | 0-120 | 0-120 | |||
Barrel heating power | 24KW | 35KW | 54KW | 75KW | 120KW | |||
Barrel cooling method | BY AIR | BY AIR | BY AIR | BY AIR | BY AIR | |||
Temperature control zone | 0.3KWx4 | 0.3KWx5 | 0.5KWx5 | 0.5KWx5 | 0.5KWx6 | |||
Motor power | 55KW | 90KW | 132KW | 185KW | 250KW | |||
Screen changer | Type | Two position plate hydraulic screen changer(without stopping machine and will not influence the final output) | ||||||
Heating | 7KW | 10KW | 16KW | 20KW | 30KW | |||
Temperature control zone | 1 | 1 | 1 | 1 | 1 | |||
Oil pump | 1.5KW | 2.2KW | 3KW | 3KW | 3KW | |||
  Die & cutting system |
Die mode | Round shape die plate | ||||||
Heating power of die | 5KW | 6KW | 10KW | 10KW | 10KW | |||
Cutting method | Die face cutting system | |||||||
Cutting motor power | 1.5KW | 1.5KW | 2.2KW | 2.2KW | 2.2KW | |||
Temperature control zone | 1 | 1 | 1 | 1 | 1 | |||
Water pump | 2.2KW | 3KW | 4KW | 4KW | 4KW | |||
Power of centrifugal dryer | 2.2KW | 3KW | 4KW | 5.5KW | 7.5KW |
Photos for your reference
Feed ABS Regind material from this vacuum system to side feederÂ
Regrind ABS materialÂ
Multi-function plastic granulating line
Vertical water ring die face cutting system which is suitable for various kinds of material
Centrifugal dryer to remove water of pellets
Vibration sieve to select good and bad pellets
In order to match your requirement and provide you a proper quotation, please advise:
• What material do you want to recycling? PE film? PP woven bag? HDPE/PP bottle? or other plastic?
• What capacity(kg/h) do you want?
• What is the final size(mm) of granules you want?
• Other special requirements about the PE plastic pelletizing machine you want.
Our service:
Before-sale
• Introduce products in detail  Â
• Recommend suitable solution  Â
• Offer test
During manufacturing
• Provide layout and engineering conditions  Â
• Offer screw plan and related documents
• Inform the project processing status  Â
• Insure the product designed in accordance with technical document
After-sale
• Provide installation, commissioning and training  Â
• Offer spare parts
• Provide necessary technical support and update information
Feel free to contact with me if you want to leanr more information.
Contact persion:Ms. Laura
Mob.: 86 15962366319
CNC Saw Blade Sharpening Machine
CTK-S450CNC
1. Rotate the angle of the grinding wheel to grind the teeth more accurately.
2. The gear grinding machine has small error and high precision.
3. The grinding machine has few transmission mechanisms and is easy to maintain.
Max. Saw Blade OD(mm) Ø150-Ø450
Pitch range(mm) 24
Saw blade teeth number 10-999
Max. saw blade thickness(mm) 4
Range of cutting angle(degree) 0.1-30
Grinding speed(t/m) 2-60
Net weight (kg) 1100kg
Dimension (LxWxH) (mm) 1300*1310*1650
We are manufacturer of Circular Saw Blade Cnc Sharpener in China, if you want to buy Cnc Saw Blade Sharpening Machine,Cnc Machine For Sharpening Circular Saws,Hss Cnc Saw Blade Sharpener please contact us.
In additions,Chittak has many other pipe processing products:Automatic 3D Laser Pipe Cutting Machine , Handheld Laser Welding Machine, Saw Blade Pipe Cutting Machine, Pipe Bending Machine , Pipe Chamfering Machine ,Metal Plate Cutting Machine and Accessories like saw blade etc.. Welcome your enquiry and hope build the business relationship with you !
Circular Saw Blade Cnc Sharpener,Cnc Saw Blade Sharpening Machine,Cnc Machine For Sharpening Circular Saws,Hss Cnc Saw Blade Sharpener
GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctkcutting.com