The development of the control valve has been seven or eight decades since the beginning of the 20th century and has successively produced ten categories of control valve products, self-operated valves and positioners, etc. The development history of the valve is as follows: 1920s: The original stability Pressure control valve available. 1930s: The "V" notch double seat valve and single seat valve are the products that come out. 40's: There locator, further generation of new control valve, there Diaphragm valve, angle valve, butterfly valve, ball valve and so on. 50's: the ball valve to get larger promotion, three-way valve instead of two single-seat valve into the system. 60's: In the domestic product of the above series of improved design and standardization, standardization, before we have a complete range of products. Now we are still using a large number of single-seat valve, seat, angle valve, three-way valve, diaphragm valve, butterfly valve, ball valve seven products is still the level of the sixties products. At this time, foreign countries began to introduce the eighth structural adjustment valve - sleeve valve. 70s: Another new structure of the product - the advent of eccentric rotary valve (the ninth category structure of the control valve varieties). Sleeve valve in this period is widely used abroad. The late 70s, the domestic joint design sleeve valve, so that China has its own sleeve valve product line. 80s: early 80s due to reform and opening up, China successfully introduced petrochemical plant and control valve technology, the sleeve valve, eccentric rotary valve has been promoted, especially the sleeve valve, a great alternative to the single, double seat valve potential , Its use is more and more widely. In the late 1980s, another significant development of regulating valves was Japan's Cv3000 and fine control valves. They were structurally modified from single spring pneumatic diaphragm actuators to multi-spring diaphragm actuators. The structure of the valve was improved rather than changed . Its distinguishing features are a 30% reduction in weight and height of the control valve and a 30% increase in flow coefficient. 90's: 90's focus is on reliability, special difficult products, improvement, improvement. By the late 90s, Hualin Company introduced the tenth structure of the product - full-featured ultra-light valve. Its salient features are a break in reliability, functionality and weight. Functional breakthrough - the only one with full-featured products, so a product can replace many of the features of incomplete products, so that the selection of simplified, easy to use, breed simplification; breakthrough in weight - a single product than the leading Seat valve, double seat valve, sleeve valve light 70 ~ 80% lighter than the fine valve 40 ~ 50%; reliability breakthrough - to solve a series of traditional valve unreliability factors, such as the reliability of the seal, Positioning reliability, the reliability of the action. The advent of the product, so that China's control valve technology and application level reached the advanced level of the late nineties; it is a major breakthrough in the control valve; especially electronic full-function ultra-light valve, will become the next century, the control valve Mainstream.

Plastic Agglomerator

Plastic Agglomerator is widely used for film or fiber recycling, it used for recycling machine industry, it can recycle PET flakes,LDPE,LLDPE,HDPE, PE, PP film and woven bags . It can also used for plastic PE PP recycling granulator line.

When the waste plastic is supplied into the chamber of such machine, it will be cut into smaller chips due to the crushing
function of the rotating knife and fixed knife. During the crushing processing, the material that soaked up lots heat from the frictional movement of material being crushing and the wall of container will be going to become semi-plasticizing state. The particles will stick with each other due to the function of plasticization. Before it sticks each other completely, the cold water pre-prepared is sprayed into the material being crushed. The water will be evaporated off quickly and the surface temperature of material being crushed drop down quickly also. So the material being crushed will become small particles or granules. It is easy to recognize the particles by different size and can be colored by using of color agent being putted into the container during the crushing processing.

Plastic Agglomerator,plastic agglomerate,Plastic Agglomerator Machine,Plastic Pelletizer

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstarmachienry.com