QDX pumps are half open impeller centrifugal submersible pumps,designed for automatic and non-automatic use.The impeller mounted on the end of the drive shaft,consists of a rear disk and blades,which are enclosed by the pump body cover.Fluid enter the ratating blade channel via the suction strainer,which forms the support base for the pump.Here the fluid moves radially from the centre outwards.Acquiring energy both in the form of pressure and increased speed.When it leaves the impeller the fluid is conveyed towards to volute.
Here part of the kinetic energy is transformed into pressure energy and the fluid leaves the pump via the side opening machined in the pump body.
Â
APPLICATION
Suitable for Clean watering, oxygenating of cluster box or in supplying and draining water for ordinary places and characterized by corrosion resistance,small volume, light weight and convenient operation.It is fitted with multiple.
Â
Materical
Pump body: Cast-iron
Motor housing: Aluminum
Impeller: Aluminum
Motor wire: Copper
Shaft: 45# steel
MOTOR
Closed,externally ventilated
Insulation Class B
Protection IP68
Continuous duty
Â
OPERATING LIMITS
Max.medium temperature:+40 ºC
Max.ambient temperature:+40 ºC
Medium free from granules or anything
that may damage the pump.
Voltage fluctuation range:0.9-1.1times
of the rated value
WARRANTY: 1 YEARÂ (according to our general sales conditions)
   Â
Main Technical Parameter
Item No | Voltage | Frequency | Power | HP | Flow rate | Head | Speed | Outlet | Float Switch |
(Hz) | (KW) | (m³/h) | (M) | (R/min) | (Inch) | ||||
QDX1.5-12-0.25 | 220V | 50Hz | 0.25 | 0.34 | 1.5 | 12 | 2860 | 1" | can add |
QDX1.5-16-0.37 | 220V | 50Hz | 0.37 | 0.5 | 1.5 | 16 | 2860 | 1" | can add |
QDX5-10-0.37 | 220V | 50Hz | 0.37 | 0.5 | 5 | 10 | 2860 | 1.5" | can add |
QDX1.5-25-0.55 | 220V | 50Hz | 0.55 | 0.75 | 1.5 | 25 | 2860 | 1" | can add |
QDX10-10-0.55 | 220V/380V | 50Hz | 0.55 | 0.75 | 10 | 10 | 2860 | 2" | can add |
QDX6-15-0.55 | 220V/380V | 50Hz | 0.55 | 0.75 | 6 | 15 | 2860 | 1.5" | can add |
QDX15-7-0.55 | 220V/380V | 50Hz | 0.75 | 1 | 15 | 7 | 2860 | 2" | can add |
QDX1.5-32-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 1.5 | 32 | 2860 | 1" | can add |
QDX8-18-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 8 | 18 | 2860 | 1.5" | can add |
QDX10-15-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 10 | 15 | 2860 | 2" | can add |
QDX15-10-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 15 | 10 | 2860 | 2.5" | can add |
QDX30-6-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 30 | 6 | 2860 | 3" | can add |
QDX3-38-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 3 | 38 | 2860 | 1" | can add |
QDX6-25-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 6 | 25 | 2860 | 1.5" | can add |
QDX10-20-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 10 | 20 | 2860 | 2" | can add |
QDX15-15-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 15 | 15 | 2860 | 2.5" | can add |
QDX30-9-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 30 | 9 | 2860 | 3" | can add |
QDX40-6-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 40 | 6 | 2860 | 3" | can add |
QDX10-25-1.5 | 220V/380V | 50Hz | 1.5 | 2 | 10 | 25 | 2860 | 2" | can add |
QDX15-20-1.5 | 220V/380V | 50Hz | 1.5 | 2 | 15 | 20 | 2860 | 2.5" | can add |
QDX40-9-1.5 | 220V/380V | 50Hz | 1.5 | 2 | 40 | 9 | 2860 | 3" | can add |
QDX6-36-1.8 | 220V/380V | 50Hz | 1.8 | 2.5 | 6 | 36 | 2860 | 1.5" | can add |
QDX10-30-1.8 | 220V/380V | 50Hz | 1.8 | 2.5 | 10 | 30 | 2860 | 2" | can add |
QDX25-16-1.8 | 220V/380V | 50Hz | 1.8 | 2.5 | 25 | 10 | 2860 | 3" | can add |
Workshop
 WORKING PRINCIPLE
QDX pumps are half open impeller centrifugal submersible pumps,designed for automatic and non-automatic use.The impeller mounted on the end of the drive shaft,consists of a rear disk and blades,which are enclosed by the pump body cover.Fluid enter the ratating blade channel via the suction strainer,which forms the support base for the pump.Here the fluid moves radially from the centre outwards.Acquiring energy both in the form of pressure and increased speed.When it leaves the impeller the fluid is conveyed towards to volute.
Here part of the kinetic energy is transformed into pressure energy and the fluid leaves the pump via the side opening machined in the pump body.
Â
APPLICATION
Suitable for Clean watering, oxygenating of cluster box or in supplying and draining water for ordinary places and characterized by corrosion resistance,small volume, light weight and convenient operation.It is fitted with multiple.
Â
Materical
Pump body: Cast-iron
Motor housing: Aluminum
Impeller: Aluminum
Motor wire: Copper
Shaft: 45# steel
MOTOR
Closed,externally ventilated
Insulation Class B
Protection IP68
Continuous duty
Â
OPERATING LIMITS
Max.medium temperature:+40 ºC
Max.ambient temperature:+40 ºC
Medium free from granules or anything
that may damage the pump.
Voltage fluctuation range:0.9-1.1times
of the rated value
WARRANTY: 1 YEARÂ (according to our general sales conditions)
   Â
Main Technical Parameter
Item No | Voltage | Frequency | Power | HP | Flow rate | Head | Speed | Outlet | Float Switch |
(Hz) | (KW) | (m³/h) | (M) | (R/min) | (Inch) | ||||
QDX1.5-12-0.25 | 220V | 50Hz | 0.25 | 0.34 | 1.5 | 12 | 2860 | 1" | can add |
QDX1.5-16-0.37 | 220V | 50Hz | 0.37 | 0.5 | 1.5 | 16 | 2860 | 1" | can add |
QDX5-10-0.37 | 220V | 50Hz | 0.37 | 0.5 | 5 | 10 | 2860 | 1.5" | can add |
QDX1.5-25-0.55 | 220V | 50Hz | 0.55 | 0.75 | 1.5 | 25 | 2860 | 1" | can add |
QDX10-10-0.55 | 220V/380V | 50Hz | 0.55 | 0.75 | 10 | 10 | 2860 | 2" | can add |
QDX6-15-0.55 | 220V/380V | 50Hz | 0.55 | 0.75 | 6 | 15 | 2860 | 1.5" | can add |
QDX15-7-0.55 | 220V/380V | 50Hz | 0.75 | 1 | 15 | 7 | 2860 | 2" | can add |
QDX1.5-32-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 1.5 | 32 | 2860 | 1" | can add |
QDX8-18-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 8 | 18 | 2860 | 1.5" | can add |
QDX10-15-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 10 | 15 | 2860 | 2" | can add |
QDX15-10-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 15 | 10 | 2860 | 2.5" | can add |
QDX30-6-0.75 | 220V/380V | 50Hz | 0.75 | 1 | 30 | 6 | 2860 | 3" | can add |
QDX3-38-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 3 | 38 | 2860 | 1" | can add |
QDX6-25-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 6 | 25 | 2860 | 1.5" | can add |
QDX10-20-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 10 | 20 | 2860 | 2" | can add |
QDX15-15-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 15 | 15 | 2860 | 2.5" | can add |
QDX30-9-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 30 | 9 | 2860 | 3" | can add |
QDX40-6-1.1 | 220V/380V | 50Hz | 1.1 | 1.5 | 40 | 6 | 2860 | 3" | can add |
QDX10-25-1.5 | 220V/380V | 50Hz | 1.5 | 2 | 10 | 25 | 2860 | 2" | can add |
QDX15-20-1.5 | 220V/380V | 50Hz | 1.5 | 2 | 15 | 20 | 2860 | 2.5" | can add |
QDX40-9-1.5 | 220V/380V | 50Hz | 1.5 | 2 | 40 | 9 | 2860 | 3" | can add |
QDX6-36-1.8 | 220V/380V | 50Hz | 1.8 | 2.5 | 6 | 36 | 2860 | 1.5" | can add |
QDX10-30-1.8 | 220V/380V | 50Hz | 1.8 | 2.5 | 10 | 30 | 2860 | 2" | can add |
QDX25-16-1.8 | 220V/380V | 50Hz | 1.8 | 2.5 | 25 | 10 | 2860 | 3" | can add |
Workshop
Â
Main features of climbing conveyor:
(1) It can transport bulk
materials at a large inclination angle, which can greatly save the floor
area of the equipment and completely solve the conveying angle that can
not be reached by ordinary and patterned belt conveyors.
(2) The
mechanized Belt Conveyor transports materials, and the overall
investment cost is low, saving about 20% ~ 30% of the investment cost.
(3) Compared with ordinary belt conveyor, bucket elevator and scraper
conveyor, this model has superior comprehensive technical performance.
(4) The conveying capacity is large, up to 6000m3 / h, and the vertical lifting height can reach 500m.
(5) When conveying materials vertically, the maximum particle size of materials can reach 400mm.
(6) it can make a smooth transition from horizontal to inclined (or vertical).
(7) low energy consumption, simple structure and convenient maintenance.
(8) The tape has high strength and long service life.
Inclined Conveyor,Inclined Belt Conveyor,Incline Conveyor Systems,Inclined Roller Conveyor
Foshan Heiteng Intelligent Technology Co., Ltd , https://www.fsheitengproductionline.com