Suntech Knitted Fabric Inspection Cutting Machine High Quality
SUNTECH Knitted Fabric Inspection Machine with optional data collection and analysis system(4-point system) to handle a wide range of fabrics, from tension-sensitive elastomeric and lycra fabrics to stable woven, technical and upholstery materials.
This machine can be supplied to operate from plait/loose fabrics to roll, or with various other fabric inlet or outlet options.Â
| Model | ST-KFIM Open Width Knitted Fabric Inspection Machine |
| Fabric Width | 1800mm-4000mm |
| Speed | 5-54m/min |
| Standard Roll Diameter | 500mm |
| Dimention(L*W*H) | 3300x3100x2000mm(for model ST-KFIM-260 only) |
| Weight | 1550kgs(for model ST-KFIM-260 only) |
| Electric Specs | 3Phase-380V; 50Hz(can be adjusted to suit for different countries) |
| Remark | Variable working width is possible and can be tailor-made to your requirements of processing needs. |
Features :
*Active Unwinding - tension control
Twin unwinding rollers are driven by motor, help fabric roll active unwinding. To avoid damage or tension caused by passive pull.
*Fabric End Stop Sensor >> -efficiency
It will allow for continuous fabric inspection, from one piece of roll to next, no need to feed fabric again.
*Dancing Roller - tension control
It will move up and down to control tension, ensuring speeds of feeding, inspecting and re-winding synchronized.
*Full Width Fabric Inspection >> -tension control
60 degree fixed angle inspection screen which has been verified thousand times with the least influence for fabric tension. It is the most suitable angle for knitted fabric.
*Scroll Roller - curled edge controlÂ
03 sets of Scroll Roller &Â Â 01 set of Air-blowing device
1. Before inspection table, the scroll roller will make fabric open totally when inspection.Â
2. After inspection, the scroll roller will open fabric curled edges again to make sure a accurate edge-align.
3. Before rewinding, the scroll roller & Air-blowing device will once more open fabric and eliminate crease for perfect roll generation.
*Digital Counter Meter
- Unit Meter(M) and Yard(YD) optional
- Error less than 0.1m/km
- Pre-set length available
*Edge-alignment Sensor
align the fabric edges accurately. When fabric declines, the rewinding station will move left or right for aligning.
*Twin Rewinding Roller Consistent roll output by actively surface rewinding with twin rubber-covered roller.
The roll compact could be adjust due to different ratio of the rollers. You could adjust the roll hardness (Loose or Tight) through the hand-wheel.
Â
Excellent Features of SUNTECH Garment Defects Fabric Inspection Method
1) Low Tension Fabric Delivery and Speed Synchronization Unique mechanical and electric device combination for making fabric feeding, delivering and re-winding synchronous.
2) Full Width Fabric Inspection - with 45 Degree Fixed Angle Inspection Screen Fabric can be checked under the aid of different viewing and lighting options.
3) Accurate Fabric Length and Optional Weighing Machine. Fabric roll length and weight can be taken by industrial standard measuring systems with digital readouts to give consistent fabric roll assessments.
Â
4) Stretch Fabric Control - with Scroll Roller System and De-curling System. Fabric controlled from input to electro/ pneumatic edge guilding system for perfect roll generation.
5) Consistent Roll Output - with Twin Rewinding Roller and Roll Hardness Adjustment Processed rolls are rewound with the minimum amount of tension and are consistent from roll to roll.
6) Versatile Fabric Input and Output Options - Synchronize with Other Production Operations Optional systems are available for different fabric input and output presentations, roll to roll, continuous fabric input and plait input and output.
7) Pneumatic Roll Ejection Device - Optional Heavy produced rolls can be pushed by the pneumatic cylinder arms so as to save labour power.
8) Data Collection and Analysis System ( 4-point System) - Optional 100% fabric inspection with software for accurate fabric roll analysis and printout.
9) Automatic Linear Cut ( Fabric Roll End Cutter) - Optional Full width cutting at the end of processed roll, fast and accurate.
About us
SUNTECH is one of the leading designers & manufacturers on textile machines for weaving & finishing units, especially for Fabric Make-up Machines and Material Storage & Handling Equipment.
Over 40 years experience, SUNTECH now has its brand office in HK and International sales office in Hangzhou. In addition, our factory is located in Ningbo city, Zhejiang, China.
Today,with more than 2500 customers and 6000 installations around the world, SUNTECH now has its agent network in Italy, Germany, Russia, Argentina, Colombia, Peru, Ecuador, Guatemala, Indonesia, Thailand, Philippines, India, Pakistan, Bangladesh, Sri Lanka, Uzbekistan, Iran,Egypt, South Africa, Syria, Mauritius, etc.
Our clients
Our service
Contact usÂ
FAQ
Q1: Is the machine have length counting? In Meter or Yard or Inch?
A1: Yes, Digital Counter Meter is installed on the machine which gives Meter counting or Yard counting.
The desired length also could be pre-set on the digital counter meter. When arrives at pre-set length, machine stops automatically.
Q2: How to feed fabric onto machine? Easy?
A2: Machine layout and drawing of feeding course will be supplied along with machine.
Q3: What is the electrical specs? Can it be used directly in my country?
A3: 3 phase, 380v and 50hz(can be adjusted to suit for different countries)
Q4: Is the control panel in English?
A4: Yes, English version for control panel and relevant operation manuals.
Q5: How long is the warranty? If any problems, how you solve it?
A5: 13 months from the date of shipment. If any quality problems within warranty, Suntech will responsible for it, and send new replacement free of charge.
Q6: Can we install it by ourselves? Overseas engineer is available?
A6: The machine will be shipped under assembled base, no need to install again.Â
Cnc Router Series
UTECH Cnc Router Series include Mini Desktop Cnc Router, Advertising Cnc Router, Woodworking Cnc Router, Professional Stone Cnc Router , Sign Cnc Router , ATC Cnc Router . Can be used for The advertising industry, Small-scale woodworking Industry, Artwork industry, Soft metal processing, Electronics industry, Stone industry. Such as signage, trademark, decorative gift, embossed medal, PVC/plastic plate, furniture decoration, MDF paint door, cupboard door and window, folding screen, embossed, jewelery, musical instrument, aluminum front panel, bronze medal, electronic component, circuit board, Marble, Jade, etc.
UTECH Cnc Machine has many types model, like mini 2030/3040/4060, common type 6090, 1212, 1325, large type 1530/2030/2040, etc. We`ve professional design team and technical person, any machine size and appearance, we all can customized for you, within 24 hours, we can provide design drawing and video with you.
UTECH CNC can provide many famous imported brand parts and other own brand with high quality, machine be equipped with parts with thick lathe bed and other parts with strong stability. Except standard parts, any others brand, we all can change them to you, we`ll follow the characteristics of the machine and according to what kind of materials you wanna process and mainly do what kind of industry.
Buy Affordable CNC Router for Sale - 3 Axis CNC Router, 3d Cnc Router Machine
Matchless Repeatability Performance Complementing Large-scale Production – CNC Routers offer exceptional repeatability for large-scale production runs and cut the operational cost, as CNC Router Machine reduces the waste pieces. Omni CNC has many such CNC Routers for Sale that reduce waste and cut cost.
Carve Intricate Designs – A number of variations of CNC Routers, including 3d CNC router, 4 and 5-Axis CNC Routers, are available, which can help carve designs at high precision.
More Production in Less Time – Multitudes of affordable CNC Routers are available that can reduce the production time substantially while increasing the precision. Buy CNC Router to increase the production rate and profits.
Reduce the Training Time – Acquiring expertise over CNC Routers is very easy. A rookie can become a pro in no time. Be it a 3-Axis CNC Router or any other, as the operator operates the machine through a computer-guided interface, gaining expertise becomes very easy.
Decrease Injury Risk – If you purchase CNC Router, the probability of work-related injury goes down significantly since the operator actions are aided by the computer interface and it comes with additional injury prevention measures.
Cnc Router Series
Cnc Router,Router Machine,Cnc Router Machine,Desktop Cnc Router
Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de