When customers purchase the thermocouple compensation wire produced by the company, they must know the ambient temperature of the thermocouple compensation wire and the on-site industrial and mining conditions. Select the appropriate compensation wire sheath according to the site ambient temperature conditions, the general ambient temperature is -25 ~ 105 °C When choosing the polyvinyl fluoride sheath, when the ambient temperature is -60～205°C, the perfluoroethylene is selected as the sheath of the compensating wire, and when the temperature is -60 to 260°C, the polytetrafluoroethylene is selected as the compensating wire of the thermocouple. set. Therefore, we must pay attention to on-site industrial and mining conditions when choosing. Thermocouple compensation wire and compensation cable are mainly used in various temperature measuring devices and have been widely used in petroleum, chemical, metallurgy, electric power and other departments.
The model of compensation wire is divided according to the product type: SC, KC, KX, EX, JX, TX.
Among them: a) The first letter of the model corresponds to the index number of the thermocouple;
b) The letter "X" indicates the extension compensation wire (type)
c) The letter “C†indicates the compensated compensation wire (type)
Note: The SC type compensation wire can be equipped with an R-type indexing thermocouple.
Attachment: Samples of compensation wire and compensation cable for thermocouples 
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
PVC Edge Banding,Edge Banding Pvc,Pvc U Trim Edge Banding,Pvc Edge Banding Trimmer
Henan Shunbang Chemical Industry CO.,Ltd , https://www.sblubricant.com