[China Instrument Network Instrument Development] Centrifuge is one of the commonly used equipment in the military, chemical, smelting and other industrial production. However, for a long time, due to the limitation of processing technology and materials, centrifuges of general materials have the shortcomings of short life and poor stability, and are increasingly difficult to meet the higher technical requirements in China's industrial production.


(Image source network has nothing to do with the text)
Recently, a good news came from Shaanxi Meixian Blower Factory, a leading manufacturer of northwest wind turbines. The plant and Shaanxi Baoji Huatai Metal Technology Co., Ltd. integrated the scientific and technological resources and jointly developed a successful titanium-based centrifuge. This technology has filled our country in this area. The blank of the field has broken the foreign monopoly of China.
Centrifuges are one of the commonly used equipment in military, chemical, and smelting industries. The Meixian Blower Factory, with equipment requirements for centrifuges on the market, combined with Baoji Titanium Industry's 90% of the country's titanium resources, began research and development on the use of titanium to produce centrifuge equipment. Titanium has the characteristics of corrosion resistance, wear resistance, high temperature resistance, and light weight in the process, and is a high-quality material for processing centrifuge equipment. However, there are also difficult problems such as high temperature setting and complicated welding process. To speed up industrial upgrading, Meixian Blower Factory and Baoji Huatai Metal Co., Ltd. carried out cooperation and the two sides integrated their own superior technological resources. The Meixian Blower Factory provided the processing technology of the fan and improved the technology. Huatai was responsible for the study of the characteristics of the material in order to explore the feasible conditions for the application of the titanium to the fan. Under the joint efforts of both sides, they finally broke the technical bottleneck. They used the argon arc welding process and a constant temperature setting technology with a high temperature of 550-600 degrees to achieve a perfect closure of the centrifuge.
The new titanium standard centrifuge overcomes the deficiencies of the centrifuges of other materials in the past and meets the technical requirements of wear resistance, corrosion resistance and high temperature resistance. At the same time, depending on the characteristics of the titanium metal, the centrifuge achieves a high degree of stability during operation. Compared with the general material centrifuge, the service life of the titanium standard centrifuge can reach 5 years, and can automatically complete the process of feeding, discharging, scraping, and braking in a highly corrosive environment, and can be widely applied to Aviation, chemical, smelting, defense and other industries.
(Original Title: Breaking the Long-term Monopoly of Overseas Titanium Centrifuges Successfully Developed)

For SANY Cylinder Seal Kit

Installation steps for SANY hydraulic cylinder seals

Cylinder Seal Kit2
1. Preparation: Clean the working surface and seals, and check if the seals are damaged or deformed.
2. Apply lubricant: Apply a layer of lubricant to the seal and sealing groove.
3. Install the seal: Place the seal into the sealing groove, ensuring that the seal is fully embedded in the groove.
4. Install O-ring: Install the O-ring above the seal, ensuring that the O-ring is fully inserted into the groove.
5. Install the piston rod: Insert the piston rod into the seal and O-ring, ensuring that the piston rod fits tightly with the seal and O-ring.
6. Install the sealing sleeve: Place the sealing sleeve on the piston rod to ensure that it fits tightly with the piston rod.
7. Tighten the nut: Use the nut to fix the sealing sleeve on the hydraulic cylinder, ensuring that the sealing sleeve is secure.
8. Check the sealing effect: Operate the hydraulic cylinder and check if there is any leakage in the sealing element. If there is any leakage, reinstall the sealing element.


For Sany Cylinder Seal Kit,For Sany Swing Motor Seal Kit,Hydraulic Pump Seal Kit For Sany,Hydraulic Pump Seal Kit Sany

Safe Seal Technology Co., Ltd. , http://www.aprseal.com