According to a new study, these hardware worth only $70 can use wearable technology to record a variety of real-time information for users, and security company Symantec Research has used a simple setup to put a Raspberry Pi computer and a Bluetooth radio modules are combined. This technology is applied to park sports and sports events. It can record broadcast data of other devices.
The wearable device did not try to connect to other ports, but Symantec said that because this simple device can capture the data transmitted by smart phones or laptops. The study found that wearable devices are particularly sensitive to wireless data. Experiments have shown that it is easy for a wearable device to recognize the unique hardware address used by other devices to transmit data. Some applications do not provide additional security protection.
Concrete Pole Spinning/Centrifugal Machine:
Concrete Pole Spinning/Centrifugal Machine is mainly apply to produce High strength centrifugal technology Prestressed Reinforced concrete pole(SPC pole) by spinning formed. According to customer's effeciency request, there are Single wheel spinning machine and Double wheel spinning machine at customer's option, it is equipped with a stepless speed-variation motor and a control panel, it works smoothly and its speeder is of wide-range. Its box base is sturdy and durable and easy for installation.
Spinning Machine's Advantages:
1. Unique "slot" design, change the screw limit between the bearing support and the base plate with the card slot and bolt limit. Both up and down sides of the spinning machine panel, undersurface and two sides of bearing support go through fine machining. Though the process is complex, it makes it more solid during high-frequency vibration of bearing support and the floor. Repair and replacement also have interchangeability.
2. Connection shaft is whole shaft, to avoid stress concentration brought by shaft diameter changes, resulting in the phenomenon of "shaft-broken".
3. The limit side of the support wheel is removable. It is convenient for users to replace.
4. Frequency-conversion cabinet of spinning machine records process parameter of each pipe and output reports, provides the office computer data communication interface.
Spinning Machine Technical Parameter:
|
Wheel Distance(mm) |
2000 |
|
Central wheel Distance(mm) |
950-1200 |
|
Wheel Diameteri(mm) |
600 |
|
Axle Diameter(mm) |
110-125 |
|
Automatic controller for centrifugal concrete pile machine |
|
We can Customize for you. If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Pole Machine,Spc Pole Spinning,Spun Pile Spinning Machine ,Spun Concrete Pile Mould
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , http://www.jshaiheng.com