Agricultural machinery is now widely used, and failures cannot be avoided. It is very dangerous for agricultural vehicles to turn to malfunction when they are in motion. Lighter vehicles can't travel normally. Serious ones can cause major accidents such as crashes, overturns, and injuries. There are three ways to prevent agricultural vehicle from turning to failure:
3, agricultural vehicles in the vehicle before and during the trip, often check the tire pressure, so that the four tires are basically balanced air pressure to prevent tire inflation due to uneven tire pressure. Once a puncture occurs at the rear, the driver should not panic. Never make an emergency brake. Reduce the throttle and reduce the speed. Lightly press the brake pedal to stop the vehicle slowly.
1, regular maintenance, if you find the steering wheel and worm gap is too large, you should replace the new roller.
2. When the agricultural vehicle is in motion, it is often checked on the connection parts such as the steering arm fixing nut and the steering ball pin of the steering system. If looseness is found, it shall be fastened in time; if the abrasion is too great, it should be replace.
3, agricultural vehicles in the vehicle before and during the trip, often check the tire pressure, so that the four tires are basically balanced air pressure to prevent tire inflation due to uneven tire pressure. Once a puncture occurs at the rear, the driver should not panic. Never make an emergency brake. Reduce the throttle and reduce the speed. Lightly press the brake pedal to stop the vehicle slowly.
Nonstandard Customized Parts,Carbide Plate,Tungsten Carbide Plate,Customized Tungsten Carbide Plate
NINGBO LANGSUN TUNGSTEN CARBIDE CO.,LTD. , https://www.lsccarbide.com