The occurrence of Spodoptera exigua in China is increasing and it gradually becomes a common pest. Therefore, the research on Spodoptera exigua must be more and more in-depth due to its natural seasonality and feeding conditions for artificial rearing. In order to effectively solve this problem, the authors conducted an indoor test and found out that an artificial climate incubator was used to subculture Spodoptera exigua in order to limit the requirements. Effective technology.
The cultivation of Spodoptera exigua in artificial climate incubators requires the control of temperature and humidity. Artificial feed is the key to successful breeding. Improper feed formulation is prone to population decline. Subcultures are poor, and it is difficult to obtain a healthy source of insects. The accuracy of the relevant test results.
The research of the artificial climate incubator found that in order to obtain the subculture of beet armyworm, each of the above technical aspects should be rigorously treated, and the feeding conditions cannot be greatly adjusted. There must not be a large number of people in the breeding environment to avoid frequent contamination. The size of the feed block should be suitable. If it is too large and does not match the finger tube, it will also cause waste. If it is too small, it will not be able to meet the needs of several instars. When we add feed again, the chance of contamination increases greatly. Disinfection must be carried out in strict accordance with the cycle, and we cannot be fortunate.
The cultivation of Spodoptera exigua in artificial climate incubators requires the control of temperature and humidity. Artificial feed is the key to successful breeding. Improper feed formulation is prone to population decline. Subcultures are poor, and it is difficult to obtain a healthy source of insects. The accuracy of the relevant test results.
The research of the artificial climate incubator found that in order to obtain the subculture of beet armyworm, each of the above technical aspects should be rigorously treated, and the feeding conditions cannot be greatly adjusted. There must not be a large number of people in the breeding environment to avoid frequent contamination. The size of the feed block should be suitable. If it is too large and does not match the finger tube, it will also cause waste. If it is too small, it will not be able to meet the needs of several instars. When we add feed again, the chance of contamination increases greatly. Disinfection must be carried out in strict accordance with the cycle, and we cannot be fortunate.
High Temperature Distributor Chute
The distributor chute is a kind of wearing parts , which serves a very short working time, mostly maintain 6 to 12 months. Under high temprature working condition, the anti-abrasion performance of metallic material will be degraded. Take 850℃ working temprature and impact property into account, Hard-plate adopts HP300 welding wire to satisfy blast furnace severe condition.
High Temperature Distributor Chute,Chromium Carbide Hardfacing Overlay,Blast Furnace Distributor Chute,Chromium Carbide Distributor Chute
SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com