The zero pressure migration steps of the smart pressure transmitter are as follows:
(1) Adjust the measuring range to the required value before the migration;
(2) According to the measurement of the lower limit of the zero migration, input the lower limit corresponding pressure, with zero adjustment potentiometer adjustment, so that the output is 4mA;
(3) Review the full scale and fine tune if necessary;
(4) If there is a large amount of migration, the transmitter's transfer switch (connector) must first be switched to the positive or negative transfer position (determined by the migration direction), then the lower limit of the measurement pressure is added, and the zero point is used to adjust the potentiometer. Adjust the output to 4MA;
(5) Repeat step 3.
Smart pressure transmitter
1). Heater: (controlled separately) A. Heater separately Set different temperature according material forming demand to insure product quality. Adjusted the voltage of heater by AC voltage meter which can insures the heater temperature steady and save power. B. Change the heater units fleetly. And it is economical for maintain because it only need change part units.
2). Controlling the heater unit separately can short the heating time and economize energy and improve product quality and reduce cost.
3). Adjustable frame: The side size clamping can be adjusted as the working required.
ABS Thermoforming Machine, Manual Vacuum Forming Machine, Plastic Vacuum Forming Machines
Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wanfengmachinery.com