General
Transformer radiator fin forming & welding line, full automatic, automatic feeding, rolling, punching, overturning for joining, multi spot welding, side seaming welding, terminal seam welding, side trimming, terminal cutting.
One line can produce four size radiator panel: 310mm, 480mm, 520mm, 535mm.
Length of radiator panel: 500~4000mm.
Rolling speed: 2~6m/min (if full automatic, line speed 1.5m/min)
PLC control, full automatic
Work flow
Decoiling- roll forming -hydraulic press-turn over table for two pieces joining -multiple spot welding- side seam welding- head welding -side shearing -head cutting -end product
Main Specification
Item | Data | |
Standard panel size | 310mm, 320mm, 460mm, 480mm, 520mm, 535mm, etc | |
Panel length | 500-4000mm | |
Length tolerance | ±1.0mm | |
Panel bearing pressure | Positive pressure≥ 0.15Mpa, negative pressure ≥ 133Kpa, without deformation | |
Panel material | ST12, SPCC, DC01 cold rolled steel, 1.0-1.2mm | |
Total power | Approx 315KW | |
Total line dimension | 46.5m X 3.5m | |
Oil fluits size | Steel thickness 1.0mm | ≥ 11mm |
Steel thickness 1.2mm | ≥ 11.5mm | |
Number of oil fluits | Panel 310mm, 320mm | 3 |
Panel 460mm, 480mm | 5 | |
Panel 520mm, 535mm | 6 | |
Input coil width | Panel 310mm | 325mm |
Panel 460mm | 475mm | |
Panel 520mm | 535mm |
Machine photos
 Fully Automatic Transformer Panel Radiator Production Line
General
Transformer radiator fin forming & welding line, full automatic, automatic feeding, rolling, punching, overturning for joining, multi spot welding, side seaming welding, terminal seam welding, side trimming, terminal cutting.
One line can produce four size radiator panel: 310mm, 480mm, 520mm, 535mm.
Length of radiator panel: 500~4000mm.
Rolling speed: 2~6m/min (if full automatic, line speed 1.5m/min)
PLC control, full automatic
Work flow
Decoiling- roll forming -hydraulic press-turn over table for two pieces joining -multiple spot welding- side seam welding- head welding -side shearing -head cutting -end product
Main Specification
Item | Data | |
Standard panel size | 310mm, 320mm, 460mm, 480mm, 520mm, 535mm, etc | |
Panel length | 500-4000mm | |
Length tolerance | ±1.0mm | |
Panel bearing pressure | Positive pressure≥ 0.15Mpa, negative pressure ≥ 133Kpa, without deformation | |
Panel material | ST12, SPCC, DC01 cold rolled steel, 1.0-1.2mm | |
Total power | Approx 315KW | |
Total line dimension | 46.5m X 3.5m | |
Oil fluits size | Steel thickness 1.0mm | ≥ 11mm |
Steel thickness 1.2mm | ≥ 11.5mm | |
Number of oil fluits | Panel 310mm, 320mm | 3 |
Panel 460mm, 480mm | 5 | |
Panel 520mm, 535mm | 6 | |
Input coil width | Panel 310mm | 325mm |
Panel 460mm | 475mm | |
Panel 520mm | 535mm |
Machine photos
Â
What is saddle fusion? Saddle fusion (sidewall fuson) is, like butt fusion and socket fusion, another process based on hot plate welding. Saddle heat fusion differs from either socket, or butt fusion methods by performing fusion into the side of the pipe wall in a transverse orientation to the main pipe, rather than in line with the pipe. Hdpe saddle welding required workshop saddle fusion machines. This hdpe fusing process can be conducted while pressurized creating a [hot tap" when allowed by regulations and the pipeline owner. The pipe and saddle fitting surfaces are heated/fusing until they reach a proper temperature, the heating tool is removed and then the weld is formed. The process is complete following a cooling process. Always have a trained joining operator perform this procedure using properly maintained Pipe Fabrication Workshop Machines. For polyethylene reducing tee fabrication, you can view Wuxi Yuda MRH series HDPE/Poly/Polyethylene plastic pipe saddle welding machines on "www(dot)cnbuttfusion(dot)com"
Saddle Fusion,Electrofusion Saddle,Saddle Welding Machine,Saddle Fusion Machines
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com