State four Shaanxi Automobile Delong F3000 front four after eight tanker chassis configuration: Delong F3000 extended high ceiling cab / flat roof cab, National Sichai 300 horsepower engine, Shaanxi gear nine gear 119 gearbox, 7.5 tons MAN+ Disc brake, 13-ton MAN double-stage bridge, 12.00 wire tire. With air conditioning, electric glass, desert air filter, 300L aluminum alloy fuel tank, Tianxing Jianzhiya version terminal, ECU speed limit, disc brake, dangerous signage, SCR national four-tail gas aftertreatment device.
National Four Shaanxi Automobile Delong F3000 front four eight oil tanker vehicle parameters
Dimensions (length × width × height) mm 11990 × 2500 × 3720
Inside the cargo compartment panel (length × width × height) mm
Or volume m3 or agitation capacity m3
Or effective volume m3 28.4
Curb weight kg 11805
Total mass kg 31000
Drive type 8X4
Chassis configuration and technical parameters
Chassis manufacturer Shaanxi Automobile Group Co., Ltd.
Chassis model SX5316GYYNN466
Engine manufacturer Weichai Power Co., Ltd.
Engine type WP10.300E40
Transmission model 9JS135
Main reducer speed ratio (drive axle speed ratio) 4.420
Tire specifications model 11.00R20 18PR, 12.00R20 16PR
Comprehensive fuel consumption L/100km 31.9
50km/h no-load constant-speed fuel consumption L/100km 17.2
ã€The main technical parameters】
Product trademark Chusheng
Announcement batch 286
Product nameCSC5316GJYS type fuel truck
Product No. ZKUHR57F05V
Total mass (Kg) 31000
Tank volume (m3) 28.4
Rated load mass (Kg) 19000, 19065
Dimensions (mm) 11990 × 2500 × 3720, 3450
Curing quality (Kg) 11805
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3,2
Load mass utilization factor
Approach angle / departure angle (°) 18/10
Front overhang / rear overhang (mm) 1525/2690
Number of axes 4
Wheelbase (mm) 1800+4575+1400, 1950+4425+1400
Axle load (Kg) 6500/6500/18000 (with two axes)
Maximum speed (Km/h) 78
Others 1, transportation medium: gasoline, category number: category 3, density 700 kg / cubic meter, effective volume of tank body 28.4 cubic meters, tank dimensions 9200 × 2480 × 1800; fueling device model / manufacturer: 80YHCB-60 / Shandong Boshan Qilu Oil Pump Factory; optional left and right side or rear ladder; 2, side / rear protective material is Q235, side protective bolt connection, rear protective welding, lower edge 550mm from the ground, section size 100 × 50mm; 3. Optional cab with chassis; only use radial tire, speed limit device, auxiliary brake device and chassis of front disc brake; install tachograph with satellite positioning function; ABS manufacturer/model: CM6XL-6S/6K ( 6S/6M) / Guangzhou Kemi Automobile Brake Technology Development Co., Ltd. (This article comes from Xiagong Chusheng)
These auxiliary brush machines are designed for automatically trimming and flagging the brooms and brushes with flat or curved profiles. Different brushes may need different models of trimming and flagging machines. And dust suction unit is included to remove dust and waste material and keep the machine clean. Working together with the brush making machines, these trimming and flagging machines can reduce the production processes and give an extraordinary high output of finished products.
Brush Trimming And Flagging Machine
Brush Trimming And Flagging Machine, Brush Trimming Equipment, Trimming Tool, Brush Trimming Machine, Brush Flagging Machine
Yangzhou Haixing CNC Brush Machine Co., Ltd. , https://www.brushmachine.nl