Model NO.: SFDP1-030-045-33
Ground Drainage and Irrigation Machinery Type: Pumping Irrigation
Certification: CE, CE, ISO9001:2008, RoHS
Condition: New
Application Field: Agriculture, Industry/Yacht/ RV
Product: Garden Pump
AMPS: 8.0A Max
Flow Rate: 11.6lpm/3.0gpm
Pressure: 45psi/3.1bar
Port Dimension: 1/2"-14 Mnpt
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
High Flow Water Pump Agricultural Spray Rvs Solar Garden Pump11.6LPM/3.0GPM 45PSI
Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
| Motor Voltage | 12/24V DC |
| Type | 3 chamber diaphragm pump, self priming, capable of being run dry |
| Mode | Demand or bypass |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max. |
| Priming Capabilities | 6 feet (1.8 m) |
| Max Pressure | 45psi (3.1bar) |
| Max Flow rate | 11.6lpm (3.0gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor options | 2 pin connector |
| On/off switch |
| Model | Switch | GPM/LPM | PSI/BAR | Max Draw (A) |
Valves | Diaphragm | Ports | Voltage | Wire Connections |
| SFDP1-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-030-045-33 | Demand | 3.0/11.6 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads |
| SFDP1-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 8.0 | EPDM | Santoprene | 1/2"-14 MNPT | 12V | 2-Pin/Leads |
| SFDP2-028-040-33 | Demand | 2.8/10.0 | 45/3.1 | 4.0 | EPDM | Santoprene | 1/2"-14 MNPT | 24V | 2-Pin/Leads  |
Rotor blade is mainly used for crushing hot sinter at 700~800℃ at the end of sintering machine. In order to extend the service life of single tooth roller, our company has chosen the method of reforming the metal composition at the worn part of single tooth roller. Chromium carbide overlay composite surface is adopted, and wear-resistant materials are added to the wear-resistant parts. The wear resistant alloy is welded in the worn part by surfacing repair.
Wear Resistant Rotor Blade,Wearable Sinter Crusher,Sinter Crusher Teeth,Wear-Resistant Sinter Crusher
SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com