In order to meet the needs of the market, the sudden emergence of numerical control system technology also provides the conditions for the technological advancement of CNC machine tools. Modern manufacturing technology puts higher requirements on numerical control technology. Wuhan Haoba Numerical Control Technology Co., Ltd. introduces some worlds here. The development of CNC technology and its equipment is mainly reflected in the following aspects:
The development of high-speed and high-efficiency machine tools towards high speeds can not only greatly increase the efficiency and reduce the processing cost, but also improve the quality and precision of surface machining of parts. Ultra-high-speed machining technology has a wide range of applicability for manufacturing to achieve high-efficiency, high-quality, and low-cost production.
Since the 1990s, the countries of Europe, the United States, and Japan have been striving to develop and apply a new generation of high-speed CNC machine tools to accelerate the development of high-speed machine tools. High-speed spindle unit (electric spindle, speed 15000-100000R/MIN), high-speed and high acceleration/deceleration de feed moving parts (rapid traverse speed 60 to 120M/MIN, cutting feed rate up to 60M/MIN), high-performance CNC New breakthroughs have emerged in both servo systems and CNC tool systems, reaching a new level of technology.
With high-speed cutting mechanism, ultra-hard wear-resistant long-life tool materials and abrasive tools, high-power high-speed electric spindles, high-acceleration/deceleration linear motor drive feed components, high-performance control systems (including monitoring systems) and protective devices The solution of key technologies in a series of technical fields provides the technological basis for the development and application of new generation high-speed CNC machine tools.
At present, in the ultra-high-speed machining, cutting and milling cutting speeds have reached 5000 to 8000 M/MIN or more; the number of spindle rotations is more than 30,000 rpm (some as high as 100,000 R/MIN); the moving speed of the table (feeding Speed): at a resolution of 1 micron, above 100M/MIN (with de 200M/MIN), at a resolution of 0.1 micron, above 24M/MIN; automatic tool change speed within 1 second; small segments The interpolation feed speed reaches 12M/MIN.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
Metal field fence also named grassland fence,are made of hot-dipped galvanized steel wire, offer high strength and tensile strength, provide safety fencing against fierce striking of cattle, horse, deer or goats.
Metal field fence is made with galvanized knot, reasonable design, and beautiful surface, strong corrosion resistance.
Material of metal field fence : Elecrto Galvanized Steel Wire, Hot Dipped Galvanized Steel Wire, PVC Coated Wire, ect.
Wire Diameter of metal field fence : 1.8mm-3.5mm
Space between lines: above 50mm, mulriple 50mm.
Space between cross wire: 50mm-600mm
Type
Mesh
Top and bottom Wire diameter (mm)
Inner wire
diameter(mm)
Roll diameter(mm)
1
7/150/813/50
102+114+127+140+152+178
2.5
2.0
2
8/150/813/50
89(75)+89+102+114+127+140+152
2.5
2.0
3
8/150/902/50
89+102+114+127+140+152+178
2.5
2.0
4
8/150/1016/50
102+114+127+140+152+178+203
2.5
2.0
5
8/150/1143/50
114+127+140+152+178+203+229
2.5
2.0
6
9/150/991/50
89(75)+89+102+114+127+140+152+178
2.5
2.0
7
9/150/1245/50
102+114+127+140+152+178+203+229
2.5
2.0
8
10/150/1194/50
89(75)+89+102+114+127+140+152+178+203
2.5
2.0
9
10/150/1334/50
89+102+114+127+140+152+178+203+229
2.5
2.0
10
11/150/1422/50
89(75)+89+102+114+127+140+152+178+203+229
2.5
2.0
Farm Fence,Grassland Fence,Hinge Joint Fence,Livestock Fencing
Anping Bochuan Wire Mesh Co., Ltd. , https://www.wiremeshbocn.com