If the sewage suction truck malfunctions, it will have an impact on its normal operation and will affect the quality of its use. Therefore, it must be avoided that the sewage suction truck malfunctions. The removal of glial and carbon deposits on the suction truck in time can greatly reduce the incidence of failure. Then, how to remove the rubber and carbon deposits of sewage suction vehicles? The following Xiaobian introduces you to the specific removal method.

图片9_副本

Sludge vehicle colloid and carbon removal method description:

1, the traditional method. After the engine is disassembled and cleaned, this method can not clean up the gums and carbon deposits left behind by the gasoline, the effect is not very good, and it is time-consuming and time consuming. Also, the engine assembly is now fixed. Completed in the environment, can not normally have the original manufacturer's assembly environment when disassembling the loading and unloading; and self-removal of the engine may encounter technical inexperienced problems, if blindly disassemble it and then install it back, may have a certain impact on its function, For example, the power is not as good as before, the sealing performance is not good, and so on, these are things that will affect the normal use of sewage suction trucks, so you can not use this method as far as possible not to use.

2, a novel method. Adding a certain proportion of fuel system cleaning protection agent to the fuel tank can automatically help clean up the gasoline caused by gum, carbon deposition and other problems. The fuel system cleaning and protective agent primer clothing is a special product for gasoline machinery, so it does not It will have any impact on the machine; it will not have any impact on the performance of the engine, it does not need to disassemble the engine, etc. It is simple and effective, and is more worthy of modern people's use and choice.

Suction sewage truck gum and coke how clear? Suggestion after clearing the gum and carbon deposits as sewage suction trucks, fuel filter should also want a change, they will not have poor oil supply problems. Pay attention to all aspects of the sewer truck in a timely manner and help it to do a good job of cleaning, repairing, and maintenance. Only then can the sewer truck normally work normally and the service life will be longer.


Our die casting services for Other Aluminum Die Castings Parts include the use of aluminum alloys. A key advantage of using aluminum in the die casting process is its low cost - aluminum parts are much less expensive than parts produced by other manufacturing processes. From a functionality perspective, aluminum die cast parts typically weigh one-third less than steel parts, while still offering the strength and durability that is essential for any lighting fixture.

Benefits of Aluminum Die Casting for Other Aluminum Die Castings Parts include:

        •    Aluminum alloy die castings have advantages over other castings, such as aesthetics, light weight, and corrosion resistance.

        •    Therefore, the use of aluminum alloy castings under the same load conditions can reduce the weight of the structure. Therefore, in the aviation industry and the production of power machinery and transport machinery, aluminum alloy castings are widely used.

        •    Aluminum alloy die-casting has a good surface gloss, good corrosion resistance in the atmosphere and fresh water, so it has a wide range of uses in the manufacture of civilian utensils

        •    Pure aluminum has good corrosion resistance in oxidizing acid media such as nitric acid and acetic acid, so aluminum castings have a certain use in the chemical industry

        •    Pure aluminum and aluminum alloys have good thermal conductivity, heat exchange devices used in chemical production, and parts that require good thermal conductivity on power machinery, such as cylinder heads and pistons for internal combustion engines, are also suitable for use with aluminum alloys. manufacture

Other Aluminum Die Castings Parts

Aluminum Die-Casting Parts,Aluminum Die Castings Parts,Advertising Aluminum Frame

Zheke Mould Technology Co. Ltd. , http://www.zkdiecasting.com