Rainfall refers to the depth of rain falling on a horizontal surface within a certain period of time. Determined with a rain gauge. In millimeters. Meteorological stations measure every 6 hours in the presence of precipitation.

The rain recorder, which provides the most original rainfall data in hydrological stations, environmental protection, agriculture, and forestry, has now been widely used. The rainfall recorder can also be called a self-reporting rain gauge. It is small in size, simple in operation, reliable in performance, and tracks rain data throughout the entire track. The rainfall recorder records long time records of rainfall data can not be modified, the software contains both Chinese and English versions to meet the needs of more people.

How to use the rainfall recorder

1. Open the computer and insert the supplied CD into the CD drive installation recorder application software. Connect the sensor to the recorder. Use the supplied communication cable to connect the recorder to the serial port of a general computer (PC586 or higher). (A computer without a serial port can connect the recorder to a computer via USB to serial port)

2. Run the recorder's application software on the computer, start the recorder, set the recorder's record start time, record period, stop time, stop mode and other parameters. Select the normal mode/power saving mode according to the interval you set. It is recommended to use the power saving mode.

3. After the setting is completed, disconnect the recorder from the computer, place the recorder on the occasion to be detected, and the recorder will start recording automatically (or it may not work offline, and real-time display of the measured parameter changes on the computer).

4. After the test is completed, connect the recorder to the computer, run the recorder application, and download the recorded data to the computer for data processing.

Injection Molds Solutions

Our company's expertise in close tolerance injection plastic molding, as well as our extensive knowledge of micromolding materials, enables us to advance the envelope of polymer science. Micromolding is one of the most difficult injection molding processes. In essence, the polymers used have "macromolecules". Handling these molecules at the tiny sizes required for micromolding is tricky because they often behave differently than they would normally do in larger applications. And, while all injection molding processes require strict tolerances, this is especially true in micromolding; Even the tiniest size change can make a part of this size unusable. Due to the unique and specialized nature of micromolding processes, we have to design new micromolding solutions for almost every project we undertake. Micromolding of very small parts naturally requires very small molds and tools. Because some of the mold pins, tool parts, etc., are only a few thousandths of an inch in diameter, even the metals we use in the mold become very fragile. Our molds and tools are manufactured using special micro-mold sources to ensure high quality and durability.Img 9462 Jpg

Injection Molds Solutions,Injection Mold Service,Customized Injection Molded Parts,Injection Plastic Molding Service

Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com