Recently, the Ministry of Industry and Information Technology and the Ministry of Public Security jointly issued the "Notice on Strengthening the Production and Registration Management of Small and Minivans, Motorcycles" (hereinafter referred to as the "Notice"). To improve the safety technical performance and safety configuration of small minivans, the implementation of the new motorcycle license-free inspection and "sales sales", the new factory motorcycle equipped with safety helmets, etc. put forward clear requirements.
The notice calls for the gradual implementation of motorcycle “sales sales†in rural areas, entrusting motorcycle sales enterprises to register and register, implementing pre-sales inspections of motorcycles, pre-production of hanging number plates, and relevant departments to implement insurance and tax one-stop processing. When the people buy a car, they will complete the registration business.
At present, it is more common to drive motorcycles without wearing safety helmets and without licenses in rural areas. Motorcycle new car registration rate is low, unlicensed and unlicensed traffic on the road is illegal, and accidents such as escape, cycling and other cases occur frequently, and the detection is difficult. Among them, the registration of motorcycles is far away, inconvenient, high cost, and poor safety awareness are important reasons why many car owners do not want to go to the cards and wear helmets.
To this end, the "Notice" requires full implementation of the motorcycle new car exemption inspection, the regulations from November 1, 2014, all new motorcycles will not be tested for safety technology before the registration of motor vehicles. After purchasing the motorcycle, the masses do not need to go to the motor safety technical inspection agency for inspection, and can directly apply for registration on the card business. At the same time, the "Notice" stipulates that since November 1, 2014, all new two-wheeled motorcycle products should be equipped with safety helmets that meet the national standards. If safety helmets are not equipped as required, they may not be sold at the factory.
The "Notice" calls for improving the technical performance of small minivans such as driving stability, braking safety, and body strength. It is stipulated that since July 1, 2015, small minivans should be equipped with anti-lock braking system (ABS). Strictly limit the number of passengers (including drivers) to no more than seven people.
We have a complete plastic consumables production line. Mold-making, injection molding and sterilization, all the procedures are done efficiently in our own factory. Precision molds, high quality raw material and advanced equipment to produce and perform quality testing with strict and comprehensive rules to ensure our products meet the highest quality and performance standards expected by the hospitals, research institutions and industrial, clinical laboratories that we supply.
• Excellent mold-making ability.
Our R&D team, with over 30 years` experiences, work with high quality mold-making equipment imported from Germany and professional mold analysis software that allow NEST to develop more precise molds.
• Injection molding in Class 10,000 and Class 100,000 clean rooms, with strict quality control.
10,764 ft2 Class 10,000 clean room and 32292 ft2 Class 100,000 clean room, all-electric high-speed injection molding machines imported from Japan, raw material which meet USP Class VI requirements. Production and quality control are performed strictly in accordance with corresponding SOP.
• Sterilization by electronic beam irradiation.
The Rhodotron TT200 electron accelerator which imported from the IBA company, Belgium. A world leader in the E-Beam sterilization industry. Sterilization process has been certified by the ISO 11137 quality system. Compared with sterilization by cobalt 60 or ethylene oxide sterilization, sterilization by electronic beam irradiation is more efficient and safer. It requires less time and will not produce any chemical residue.
Vacuum Filtration Systems
NEST Disposable Vacuum Filtration System is useful for large volume sample separation and sterilization for tissue culture media and other biological buffers. The units include PES or PVDF membrane filters with graduated filter tops made with polystyrene, and Acrylonitrile-Butadiene-Styrene necks with polystyrene receiving bottles. A separated sterile polyethylene cap is included. Filtration system is manufactured from raw material of high transparency polystyrene (PS) in three different volumes: 250mL / 500mL / 1000mL. They are available in three styles: complete filter/ Storage Bottle systems, bottle top filters, and receiving bottles only.
15 mL&50 mL Centrifuge Tubes
NEST centrifuge tubes could be commonly used to collect cells and separate biomacromolecules by centrifugation in biochemistry and other biological fields. They can also be used to store photosensitive samples and special chemiluminescence reagent.
Micro Centrifuge Tubes
NEST centrifuge tubes could be commonly used to collect cells and separate biomacromolecules by centrifugation in biochemistry and other biological fields. They can also be used to store photosensitive samples and special chemiluminescence Reagents .
250 mL&500 mL Centrifuge Tube
The 250mL & 500mL centrifuge tubes can process a large number of samples at one time and are suitable for separation and harvest of large cells, supernatants, bacteria, yeast and tissue samples, therefore they are widely used in the field of life sciences and clinical experiments and can meet the requirements of biological analysis.
NEST Pipette Tips are ultra-clear and have a universal fit to most Pipettes . Made from 100% polypropylene, low-retention plastic, these tips ensure accurate sample results during liquid handling. The Nest Pipette Tip line is packaged Rnase/Dnase, pyrogen free. Choose the right size for your research: 10µL, 100µL, 200µL, 300µL, 1000µL and 1250µL.
NEST automation tips can be used for research and development and other commonly used applications with needs of high-throughput pipetting in genomics, proteomics, cytomics, immunoassays, metabolomics, biopharmaceuticals.
Automation Tips for Brand B Systems
Beckman robotic tips are used in Beckman FX / NX,Biomek i5 / i7 and Biomek 3000.
Square Shape PET Media Bottles
It is mainly used for storing and sampling active pharmaceutical ingredients, bulk intermediates, and also for preparing, storing buffers, culture solutions or long-term storage of pH sensitive liquids. It can be used to store reagents but cannot be used as heating vessels
Round Storage Bottles
Sterile and enzyme-free plastic reagent bottles, suitable for product packaging and storage requirements in Molecular Biology and Cell Biology , laboratory medicine, genomics and proteomics and other areas. Improvement of the quality of product packaging helps to improve the company image and brand value, let your product packaging meet international standards and enter the international market.
General Lab Plasticware,Polystyrene Storage Bottles,Transfer Pipette,Centrifuge Tube Racks
Wuxi NEST Biotechnology Co.,Ltd , https://www.nest-biotech.com