Qt4-25 Automatic Concrete Hollow Interlock Paver Block Brick Making Machine

QT4-25 simple automatic hollow block machine line

1. Raw material proportion 
1). Cement 8-10%, 30%-40%sand, 50%-60% crushed stone
2). Cement 8-10%, flyash 30%, sand (stone powder)60%, 2 gypsum

2. Work area
Workshop: 50-100 square meter
Total land: 1000 square meter( according to your own situation)



3. our service
1). Customized color is available based on previous notice.
2). The third party inspection is available.
3). If needed, the seller can help the buyer to handle shipping and
Insurance.
4). Marking and package shall be arranged according to applicable
International requirements.
5). Guarantee: Our block machine has been taken under guarantee
By the seller from the date of commissioning within 12 months on
The premise of regular use of the buyer. An Acceptance Act will follow
To inspect the application of the equipment.
6). Installation & commissioning is available based on the clients' Requirement.


(4)Pan Mixer
All the materilas are put into the mixer tank and mixed in it at same time. It will need one worker to operate the mixer.

(5)Conveyor belt
The mixed materials down from mixer conveyed to molding machine hopper for making blocks.
(6)Molding machine:
The molding machine is the key of all production line. By pressing the mixed materials, it can make block, brick, interlock paver and curbstone with different moulds.
It is controlled by PLC and Hydraulic station.
(7)Block conveyor
It will support the fresh blocks.
The fresh block/brick come out from mould convey to the block conveyor.
(8)Trolley
The trolley will transport the pallets with fresh blocks to the store yard for curing. Usually transport 3 pallets each time


5. Machine Parameters
6.Production 
 
For further information, please contact us!
We always do the Best!

UIC Standard Fish Plate

Uic54 Rail Joint Bar,Uic Standard Fish Plates,Uic54 Fish Plate,Railway Uic60 Joint Bars

Anyang Railway Equipment CO.,Ltd , https://www.ayrailway-at.com