China Automotive Networking Aerial Work Vehicles Columns are listed in the China Ministry of Industry and Information Technology High-altitude Vehicles Automotive Bulletin All 5 Categories 93 Manufacturers 81 Aerial Work Vehicles Brands 1290 Aerial Work Vehicles Product Information, Latest Aerial Working Vehicles Announcements, Environmental Notices , fuel announcements, exemption announcements, pictures, news, and the most timely price information for aerial vehicles.
Self-Propelled Telescopic Booms Definition: The lifting mechanism of the aerial working platform is a crane type, and the operating mechanism is a high-altitude vehicle of a tire type vehicle. Scope of application: Suitable for high-altitude operations of large-scale engineering projects. Lifting arm aerial work vehicle operation rules 6. The choice of parking position should be a solid ground. The inclination of the vehicle should not exceed 3° and the warning flashing lights should be turned on. 7. Working height and wind power (Baufort); Wind 6 or below suitable height 10 meters below the operation; Wind power level 5 can work below 11~20 meters; Wind 4 and below suitable height 21 to 30 meters below the operation. 8. Start the oil pump, step on the clutch of the car, pull on the handbrake, and the transmission is in neutral gear, and pull the hydraulic oil clutch clutch lever to make the hydraulic oil pump work. 9. After the hydraulic pump runs for 2 to 5 minutes, it can operate the handles of each movement. 10. The operation of aerial vehicles should be trained and hold personnel responsible for operational licenses. 11, the operator must concentrate on the prevention of misuse and strictly prohibit alcohol after the operation. 12, first put down the legs, if necessary, put the pad under the leg of the leg to ensure that the vehicle is in a horizontal state. 13. When operating the handle, it should be steady, and do not swift and swift in order to avoid the inertial swing of the working arm and the accident. 14. Operate strictly in accordance with the technical parameters and operating ranges specified by the equipment. 15. The staff on the operation bucket (platform) should wear a seat belt. 16. When raising and lowering the work bucket (platform), the upper and lower arms should be alternately operated to ensure that the bucket (platform) is in the best rising radius. It is forbidden to use the working arm for other purposes. 17. During operation, the operator should pay attention to the safety distance of the bucket (platform), arms and high and low voltage wires, telephone lines and buildings, big trees, billboards, lighting and other objects. 18. The on-duty driver is responsible for the ground and pay attention to the safety protection of the traffic. 19, the use of the operating height of 25 meters above the truck, in addition to setting up safety signs and guardrails, the ground guardian in addition to the driver, but also set up 1-2 people responsible for strengthening the guardianship. 20. During the operation process, if there is abnormal noise in the hydraulic system or sudden leakage of oil, the work should be stopped. Only after the inspection or repair can the work be continued. 21. When the hydraulic system fails and the working arm is unable to move, it should try to evacuate the work personnel on the work platform (platform) and notify the professional maintenance personnel to handle it. 22. After the operation is completed, the operation bucket (platform), the operation arm is reset, the support leg is retracted, and the hydraulic oil pump is disengaged, and the hand brake is released to start driving. other 23, high-altitude operation bucket (platform), arm and leg should have reflective safety signs. 24. The aerial vehicles shall be equipped with two triangular (tire) skids and four outriggers. 25. The vehicle should be equipped with a horizontal sign. 25. The most common aerial platforms currently on the market include: Dongfeng Aerial Work Trucks, Liberation Aerial Work Vehicles, Ao Ling Aerial Work Vehicles, Qingling Aerial Work Trucks, Jiangling Aerial Work Trucks, and JAC Aerial Work Trucks. The use of aerial vehicles: Mainly used in electricity, communications, street lamps, traffic police, highways, cable television, ship repair, construction, gardens, advertising, photography, large enterprises and other industries [1]
Self-Propelled Telescopic Booms
Rising and falling aerial vehicles
Football Medals,Football Race Medals,Soccer Race Medals,Engraved Soccer Medals
ZHONGSHAN LAVI HARDWARE PRODUCTS CO., LIMITED , https://www.lavimedal.com