The data shows that there are nearly 1,000 professional blow molding machine manufacturers in the country, of which more than 300 are not stable enough. Nearly 10% of the companies annually change production or close down. There are only 10 companies with output value and sales exceeding RMB 100 million, and less than 30 companies with annual sales exceeding RMB 30 million. 75% of the export products in the industry are produced by these 30 companies.
Pharmaceutical companies are big demanders for bottles, and of course, bottle blowing machines cannot be made. At present, there are few companies that manufacture large-scale blow molding machines in the country, and their competition is much smaller than that of small blow molding machines. Therefore, there is more room for profit. Relevant enterprises must seize opportunities and promote the development of the industry towards the group.

It is understood that at present, China's bottle blowing machinery manufacturing industry has a pyramidal distribution of products. At the bottom is a large number of low-level repetitive products, while relatively few high-end products, the industry is facing development confusion, with the pharmaceutical industry continues to grow, pharmaceuticals The packaging industry is also accompanied by expansion. It also stimulated the blowing machine industry. China's current bottle blowing machine industry is facing several major problems:

First, bottle blowing machine companies urgently need to develop in the direction of green, environmental protection, quality optimization, and high energy. How to better develop the blowing machine industry based on the objectives of safety, health and environmental protection. In the severely polluted 21st century, only the combination of environmental protection and zero pollution can better continue to grow and expand the blow molding machine industry.

Second, the blowing machine industry is currently concentrated in Taizhou, Zhangzhou and Foshan. Although small and large, it is not enough to compete with the international community. Bottle blowing machine companies in China need to build brand. Only by building a brand, can the blowing machine go abroad and go global.

Third, the secondary use of blowing machine. Due to the high price of new blowing machines, used bottle blowing machines have become the first choice for small-scale small businesses. However, because it is used, the quality cannot be guaranteed, and the seller is unable to provide a warranty, which restricts some orders. The establishment of a dedicated second-hand blower trading platform is imminent.

Insiders pointed out that the domestic bottle blowing machine should establish a product quality index system that is compatible with international standards or industrial advanced country standards, and implement the whole process of design, manufacture, inspection, installation, commissioning, and service. Key products are licensed for production, and companies must also strengthen quality awareness and quality management.

Filter Paper

Xinxiang SKF Machinery supply whole set of grinding solution, including the grinding oil filter paper.

Production introduction:

In the grinding oil, there are always mixed with oil slick, impurity, slag, etc. It should be cleaned regularly, or the grinding efficiency and lifespan will be reduced largely and finally influence the equipment grinding efficiency. At the same time, when the grinding oil was covered by the closed oil reservoir, the anaerobion can easily breed, this will result in grinding oil invalid. So to clean the

oil slick, impurity, slag out from the grinding oil is very important, in this way we can not only keep a good grinding oil performance but also expand the grinding oil life largely. At last, reduce the grinding oil cost, improve grinding life and efficiency!



grinding oil filter paper

Filter Paper,Coolant Water Filter Paper,Cutting Oil Filter Paper,Grinding Oil Filter Paper

Xinxiang SKF machinery Co., Ltd. , https://www.grindingmachine.nl