Model NO.: Floor Deck Forming Machine
Type: Floor Deck Roll Forming Machine
Material: Galvanized Steel,Aluzinc Steel
Roller Material: S45c ,45#Steel with Chrome Treatment
Yield Stress: G450 ~ G550
Max.Forming Speed: 12 M/Min
Main Motor Power: 22 Kw
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
Anti-Earthquake Galvanized Steel Floor Decking SheetSteel Floor Decking with Stable Quality
Components for the Machine:
The roll forming machine consists of 8-ton hydraulic uncoiler, infeed guide, embossing rollers, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
Technical ParametersÂ
Material Specification | Aluzinc steel and galvanized steel. |
Thickness | WLFM51-326.5-980, 0.75 mm to 1.5mm; WLFM75-300-900, 0.75mm to 1.50mm. |
Main Motor Power | 22kw (two sections of machine, each secton has one motor with 11kw). |
Hydraulic Station Power | 7.5kw. |
Feeding Width | 1000mm |
Cover Width | 920mm |
Steel Stress | G450 ~ G550. |
Roll Forming Speed | 12 m/minute. |
Cutting Tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm |
Hydraulic Uncoiler | Max. capacity: 8'000kgs. |
Coil Inner Diameter | 508mm. |
Voltage | As per customer's request. |
Numbers of Stations | 26 stations |
Type of Cutting | Roll-formed and length-set profile cutting. |
 Material of Main Equipment
Roller Material | High grade S45C forged steel, coated with hard chrome; some important roller wheels are chosen Cr12 mold steel, coated with hard chrome. |
Active Shaft Material | High grade S45C carbon wrought steel, diameter 85mm. |
Electric Elements | PLC control console, touch screen and transducer, from Mitsubishi, Japan. Other elements, from Schneider Electric, Germany. |
Cutter blades | Cr12MoV steel with quenched treatment, hardness HRC58~61, wear-resistance, good steel structure, long life. |
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;Â
3.Spare parts and some small parts packed in plastic tooling box;Â
4.All Components Fixed by steel wire with Container.
Â
Company Profile
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.Â
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.